The Kyoritsu 6016 is an advanced 10 in 1 Digital Multifunction Tester with the capabilities of testing loop impedance, continuity, insulation, RCD, PSC, PFC, earth resistance, AC voltage and phase rotation.
The Kyrotisu 6016 has the ability to perform continuity measurements up to 2000Ω. This can be carried out via the test button lockdown feature which allows for continuous testing. An instantaneous indication of the continuity is given by the selectable buzzer and live circuit warnings are outlined by a flashing LED and buzzer, as well as on the display.
The Kyoristu 6016 provides comprehensive RCD testing for RCD type A (pulsating direct currents), RCD type AC (alternating currents), general and selective RCDs (delayed). Measurements can be at 0.5, 1 and 5 times the rated nominal RCD current. Featuring both autotest and ramp functions, the 6016 has selectable touch voltage (25V and 50V) to suit the application.
Furthermore, 6016 can be utilised to measure both earth resistance and three phase rotation. Earth resistance can be measured up to 2000Ω. This can be undertaken using the volt-ampere method without an external power source and with the supplied auxiliary spikes. The 6016 can be applied to measure the phase rotation of three-phase lines with a clear indication of the sequence on the LCD display.
The Kyoritsu 6016 is supplied with carrying case, test leads, auxiliary spikes and software.
Continuity measurements up to 2000Ω
Three-phase rotation testing
RCD testing with ramp and autotest functions
Lockdown test button for "hands-free testing"
Calculation of Prospective Short Current (PSC) and Prospective Fault Current (PFC).
Loop impedance testing including phase to phase loops.
Measures AC voltages up to 500V (includes frequency of voltage).
Earth resistance measurements up to 2000Ω
Supplied with carrying case, test leads, auxiliary spikes and software.
Test Equipment | Electrical, HVAC and Industrial Test Equipment IndustrySearch Trusted Supplier
Test Equipment specialises in sales, service and calibration of test and measurement equipment and instruments from our facility, located in Brisbane. From here, we are ideally positioned to offer a ...