18" Wide Flexible Roller Conveyor

Fully Extended - 200 pounds/lineal foot

• Rollers
• S-1-3/8" OD (Outside Diameter), galvanized steel rolled with sealed ball bearings and spring-loaded axles.
  
• Axles
• 5/16" full -length steel axles at leg point assembly and spring-loaded connections at side links.
  
• Axle Centers
• Standard 5-1/4" axle centers. To accommodate small packages, restrictors are also available for 3" or 4" centers.
  
• Leg sets and 4-Point Connection
• 1-1/8" OD (Outside Diameter),
• 12-gauge steel tubing with adjustable reinforced inner leg and double cross-braces, zinc plated.
• Incremental height marks are provided on outer leg to facilitate uniform pitch adjustment.
• Four-point bolted leg connection to axles and side links.
  
• Height Adjustment
• Standard: 28" to 36"
• Optional: 24" to 28" - 36" to 44" - 44" to 52"
  
• Side Links and Connections
• 7-gauge, zinc-plated steel.
• Top connections are provided by 5/16" steel axles with lock nuts.
• Cross-point connections are steel pivot pins with spring-loaded retainers.
• Bottom connections are a combination of pivot pins and 5/16" steel tie rods.
  
• Box Stop Handle
• Heavy-duty 1-1/8" OD (Outside Diameter),
• 12-gauge steel tubing with 1/4" steel brackets, zinc plated.
• Box stop folds down when connecting the conveyor to equipment or other conveyors.
• The box stop is also a convenient push/pull handle.
  
• Couplers
• To link conveyors together, each unit is equipped with one set of 7-gauge steel couplers opposite the box stop end.
• Couplers may also be added to the box stop end.
  
• Heavy-Duty Casters
• Standard: 5" x 1-1/2" swivel caster with heavy-duty stem.
• Casters with swivel/wheel lock pedal brakes are provided on the first and last leg sets.