Assembly includes 3 submersible pump, motor & starter box only.
0 liters per min / 0.00 liters per second @ 71m head
10 liters per min / 0.16 liters per second @ 66m head
20 liters per min / 0.33 liters per second @ 58m head
30 liters per min / 0.50 liters per second @ 48m head
35 liters per min / 0.58 liters per second @ 41m head
40 liters per min / 0.66 liters per second @ 34m head
45 liters per min / 0.75 liters per second @ 26m head
50 liters per min / 0.83 liters per second @ 18m head
This model has a 0.55kw/0.75hp 3-wire (4-core) single 1 phase motor.
As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor. However, it has the added feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below. Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump:
The info below is a guide only, you must check with your electrician on cable size. 3-wire/4 core:
1.5mm sq cable up to 55m
2.5mm sq cable up to 90m
4mm sq cable up to 140m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable
Available in 3mm cable or 4mm cable
Stainless Steel Support Cable Grips/Clamps
Available in 3mm or 4mm to suit S/S Cable
Liquid Filled 63mm – Available in 0-800kPa, 0-1000kPa, 0-1600kPa and 0-2400kPa
The installation roller fits on the top of the bore casing making it easy to lift and lower the bore pump down the borehole.
View the 3 Three Inch Bore Pump at Strongman Pumps
Strongman Pumps | Online sales of Water Pumps IndustrySearch Trusted Supplier
We are an Australian business that ship pumps daily Australia Wide from various locations around Australia with no charge to the customer.
2007 - Started selling OEM Bore Pumps and the business name ...