The Metallisation ARC150 system offers a great balance of controllable throughput with flexible operation and the opportunity to have extended supplies packages up to 50m from the energiser to the pistol.
A number of new features are included to enable reliable spraying at 500A, 100% continuous duty cycle. These include a new pistol front end with contact tips instead of solid tubes; up-rated supplies / cooled conductors and terminals; a heavy duty drive unit with new, v-shaped rollers; heavy duty flexible drive and a new 500A energiser with high specification digital meters. These features combine to give a flexible, reliable and manageable solution for medium and large scale thermal spray applications, producing quality, fine surface finish coatings.
500A spray capacity (high productivity).
New 500A energiser with digital display
Closed-loop current (simplicity/reliability)
Uses 2.3/2.5mm anti-corrosion wires.
1.6mm setup for high temperature alloys.
Air cooled cables (lightweight).
Flexible pistol manoevrability.
10 and 20m supplies packages (max wire feed).
Extension supplies to extend up to 50m.
Easy to setup and maintain (enabling high productivity).
MIG, hardboard reel and drum dispense.
New heavy duty drive unit and rollers.
New contact tips enabling reliability at higher current.
100% duty cycle (reliability and productivity).
Typical Applications: Multi-coat System for Both Engineering and Anti-Corrosive Coatings Including:
Reclamation of worn components
Restoration of diameter
Anti-corrosion protection to replace or repair galvanising
Anti-corrosion protection using Zinc, or Aluminium, or 85/15 Zinc Aluminium, or AlMg5.
Pipes and vessels
Internal vessel / boilers
Gates / fences
MSSA Interweld | Metal Spray & Specialist Welding Equipment
Metal Spray Supplies and MSSA Interweld are Australian based manufacturers and suppliers of equipment and consumables to the thermal spray, metal spray and specialised welding industries worldwide.