Princetel Inc. - Electrical Slip Rings | SR202 Series

The integrated device can be easily separated in the field for repair or maintenance. The picture on the left shows a 30-ring version with a singlemode MJX series FORJ. Up to 100 rings can be accommodated in the design.

The compact lightweight slip ring promises low maintenance and a very long life cycle (30-100 million revolutions!). SR202G are based on gold-on-gold design. The standard version is not sealed. Higher voltage ratings and larger current capacity are also possible. Please call for your special need.

 

PARAMETERS	VALUES
Ring material	Coin silver/Gold alloy (SR202G)
Brush material	Silver graphite/Gold alloy (SR202G)
Spring material	Beryllium copper/Gold alloy (SR202G)
Housing material	Anodized aluminum
Operating voltage	250 V(RMS)
Operating current	5 Amp/ring
Noise level	<5 uV
Leakage resistance	>10 G Ohms
Contact resistance	<500 milliohms (typical 50-100 milliohms)
R variation during rotation	<10 milliohms (typical 1 milliohm)
Wire gauge	22 AWG, 1 m (standard)
Connector type	Optional
Rotation speed	500 rpm
IP rating	IP 68(FORJ)/IP 50 (slipring)
Working temperature	-40 to 65 C
Storage temperature	-50 to 85 C
Dimensions	44 mm (body dia.) x 100 mm (length varies)
Weight	~250 g

 

Read more...

Need more information? Message LightOptronics Aust. via the form, or call and say you found them on IndustrySearch so they can best assist you.

The integrated device can be easily separated in the field for repair or maintenance. The picture on the left shows a 30-ring version with a singlemode MJX series FORJ. Up to 100 rings can be accommodated in the design.

The compact lightweight slip ring promises low maintenance and a very long life cycle (30-100 million revolutions!). SR202G are based on gold-on-gold design. The standard version is not sealed. Higher voltage ratings and larger current capacity are also possible. Please call for your special need.

PARAMETERS	VALUES
Ring material	Coin silver/Gold alloy (SR202G)
Brush material	Silver graphite/Gold alloy (SR202G)
Spring material	Beryllium copper/Gold alloy (SR202G)
Housing material	Anodized aluminum
Operating voltage	250 V(RMS)
Operating current	5 Amp/ring
Noise level	<5 uV
Leakage resistance	>10 G Ohms
Contact resistance	<500 milliohms (typical 50-100 milliohms)
R variation during rotation	<10 milliohms (typical 1 milliohm)
Wire gauge	22 AWG, 1 m (standard)
Connector type	Optional
Rotation speed	500 rpm
IP rating	IP 68(FORJ)/IP 50 (slipring)
Working temperature	-40 to 65 C
Storage temperature	-50 to 85 C
Dimensions	44 mm (body dia.) x 100 mm (length varies)
Weight	~250 g

Read less...

Need more information? Message LightOptronics Aust. via the form, or call and say you found them on IndustrySearch so they can best assist you.