The 4106 has a low output voltage of approx or less than 10V RMS and, thus, can be applied to measure earth resistances on power distribution lines, in-house wiring systems and electrical appliances.
The Kyoristu 4106 is specified to measure earth resistances from 0.001O to 200 kO across six different ranges. The instrument can provide a high test current, up to 80mA, to accommodate a resolution of 0.001O on the 2O range. Advance filtering is also provided, using a Fast Fourier Transform (FFT) implementation, to reduce noise interference and obtain stable measurements.
The measurements can be saved in the memory (up to 800 measurements) and recalled on the display. Saved results can additionally be transferred to a PC via the provided USB adaptor and the included reporting software.
The Kyoristu 4106 comprises three AC current ranges (20mA/200mA/200A), as well as both automatic and manual selection of the test current frequency (94/105/111/128Hz). Earth resisitivity (?) can be automaticallly calculated after setting the distance between the auxiliary earth spike (Wenner method).
Applications for this product
Ideally used for power distribution lines
In-house wiring systems
Features of this product
Earth resistance measurements from 0.001O to 200 kO.
High test current up to 80mA yielding resolution of 0.001O on 2O range.
Low output voltage (= 10V RMS).
Advanced Filtering method (based on FFT Fast Fourier Transform) to reduce noise interference and obtain stable measurements.
Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz).
Warning for excessive noise and high Auxiliary Earth Spikes resistance.
Three AC current ranges 20mA/200mA/200A.
Auto-power off function.
In-built memory - save and recall up to 800 measured results.
Large Graphic Display with backlight for readings in poorly illuminated areas.
Robust design with IP54 protection.
Test Equipment | Electrical, HVAC and Industrial Test Equipment
Test Equipment specialises in sales, service and calibration of test and measurement equipment and instruments from our facility, located in Brisbane. From here, we are ideally positioned to offer a full range of electrical test equipment across Australia and New Zealand. In addition to electrical test equipment, we also offer a full range of HVAC test equipment, as well as extensive industrial and process test instruments. All equipment supplied by us is backed with a full warranty, after sales support and technical backup, including training. Our calibration laboratory can offer traceable test instrument calibrations with fast turnaround where required.
We represent a number of major brands of electrical test equipment including AEMC, Sonel, HT Italia, and also TnT test and tag equipment. Additionally we represent Digitron, Dwyer Instruments and Fieldpiece who offer a comprehensive range of HVAC test equipment. For those customers in the gas industry, the range of E-Instruments combustion analysers and Air Quality Meters are sure to satisfy your needs. We also stock a large range of FLIR Thermal Imaging Cameras and also offer full product and software support, including FLIR approved product training.
Located approximately 35km from Brisbane CBD with easy access from both Brisbane metro and the Gold Coast, we are ideally placed to service the whole of Australia from our base here. With daily courier pick ups, we ship goods daily across Australia and are proud of our ability to be a truly national provider of test and measurement solutions to a growing base of clients, who rely on us to safely undertake their projects.
If you are not sure which test instrument is right for you, pick up the phone and speak to a member of staff. All staff employed by Test Equipment are experts in their specialist field and can assist with product selection, application and support. We are also contactable by email 24 hours a day, 7 days a week.