The Stud Tensioner uses hydraulic pressure to tension the bolt to the exact load required. Once the bolt has been tensioned, the nut is wound down the thread to retain the load.
The tensioner is then de-pressurised, released and ready to use again.
The Spring Return Stud Tensioner is suitable for use where:
Accurate and reliable loading is required on bolting
Vibrational or torsional stresses are a problem
Regular maintenance requires repeated adjustment or removal of nuts
There are confined and difficult nut locations
Simultaneous tightening of bolts is required (e.g. Flanges)
All dimensions are in millimetres
Stroke for all models is 15mm
Maximum force is generated at 150 MPa
Stud Tensioner ordered as a complete tool, for example: B3S-L4-M36X40 is specified to suit M36x4
Adaptor Kits ordered separately, for example: SL4-MX36X40 is specified to suit M36x4.0
Norbar Torque Tools (Aust) | Torque and Tension Specialist
Norbar Torque Tools is a global leader in the manufacture, supply, distribution and calibration of a range of torque equipment across a wide range of industries. We are one of the largest manufacturer ...