Bulltech M650-Quatro
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
M650-Quatro |
|
LASER SYSTEM | Type:fiber laser Wave Length:1064nm Power:700W×4 (500W/1000W optional) |
RECOATING SYSTEM | Process: Double-cylinder Bi-directional powder feeding and scraper coating Layer Thickness:0.02~0.1mm |
OPTICAL & SCANNING | Beam (diameter@1/e2):≤ 0.1mm Scanning Galvanometer:ScanLab×4 Scanning Speed:up to 34m/s Building Speed:2-120cm³/h |
ELEVATOR | Drive Mode:servo motor precision reduction drive Printin Board Bearing Weight:≥4000kg Repositioning Accuracy: ±0.005mm |
BUILD VAT | Size:625mm(X)*625mm(Y)*1100mm(Z) Heat: precision resistance wire heating
Protective Gas:N2 / Argon Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper Alloy / Precious Metal etc. |
SOFTWARE | Control Software:Bulltech Date Preparation Software:Materialise Magics Data Interface:STL or other convertible format |
WORKING CONDITION | Power:380VAC 50/60Hz 25KW Ambient Temperature:15-36ºC Relative Humidity:≤ 40% Dimension:3105mm(L)*2750mm(W)*4200m(H) |
Key Features
To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about Bulltech M650-Quatro use Get a quote.
SLM printing uses selective laser melting technology which melts metal powders and solidifies layer by layer until a three-dimensional part is built. During the process, the ruler in the build chamber will pave one layer of the metal powder, a high powered laser selectively fuses the powder by tracing cross-section of the part on the surface of a powder bed and then a new coat of material is applied for the next layer. The whole process is in a high vacuum chamber or full of protective gas chamber to avoid the metal powder reacts with oxygen at high temperature.
M650-Quatro |
|
LASER SYSTEM | Type:fiber laser Wave Length:1064nm Power:700W×4 (500W/1000W optional) |
RECOATING SYSTEM | Process: Double-cylinder Bi-directional powder feeding and scraper coating Layer Thickness:0.02~0.1mm |
OPTICAL & SCANNING | Beam (diameter@1/e2):≤ 0.1mm Scanning Galvanometer:ScanLab×4 Scanning Speed:up to 34m/s Building Speed:2-120cm³/h |
ELEVATOR | Drive Mode:servo motor precision reduction drive Printin Board Bearing Weight:≥4000kg Repositioning Accuracy: ±0.005mm |
BUILD VAT | Size:625mm(X)*625mm(Y)*1100mm(Z) Heat: precision resistance wire heating
Protective Gas:N2 / Argon Materials: Stainless Steel / Die Steel / Titanium Alloy / Aluminum Alloy / Co-Cr Alloy / Nickel Alloy / Copper Alloy / Precious Metal etc. |
SOFTWARE | Control Software:Bulltech Date Preparation Software:Materialise Magics Data Interface:STL or other convertible format |
WORKING CONDITION | Power:380VAC 50/60Hz 25KW Ambient Temperature:15-36ºC Relative Humidity:≤ 40% Dimension:3105mm(L)*2750mm(W)*4200m(H) |
Key Features
To contact Plasquip Sales and Smart Manufacturing & Packaging Solutions about Bulltech M650-Quatro use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product