"Easy to use. Multiple quotes by most brands on the list. Effective platform indeed - Thank you"
How IndustrySearch works
1. Tell us what you need
in a few quick steps
2. Get personalised quotes
from expert suppliers
3. Compare and make the
best choice
Looking to buy the best Rs Pro Flow Sensor for sale? Get Quotes sends your requirements to expert suppliers in Australia so you get personalised quotes to compare Flow Sensor prices, specifications, features and terms then choose the one that’s right for you. Also compare servicing, consumables and reviews, so you can buy with confidence.
RS Components | Electronics, Industrial, Electrical & More... RS Components is your one stop distributor for electrical, industrial, automation & control gear, electronics, test & measurement, safety and more - with over 600,000 products from more than 2,500 leading global suppliers including RS PRO, Fluke, TE Connectivity, Phoenix Contact, Schneider, Siemens, ABB, Omron, Harting and more.
With free delivery for orders over $125 excl. ...
A flow sensor is a device used to measure the flow rate or volume of a fluid, such as water or air. It typically consists of a sensing element, which is placed in the fluid stream, and a transducer, which converts the physical parameters of the flow into an electrical signal that can be measured and analyzed. Flow sensors can be used in a wide range of applications, from monitoring the flow of water in a household plumbing system to measuring the flow of air in a manufacturing process. They are often used in conjunction with other sensors and control systems to optimize the performance and efficiency of industrial processes and equipment.
What types of flow sensors are available in Australia?
There are various types of flow sensors available in Australia, including:
Magnetic flow sensors: These sensors use the principle of Faraday's law to measure the flow rate of a liquid.
Ultrasonic flow sensors: These sensors use ultrasonic waves to measure the flow rate of a liquid.
Turbine flow sensors: These sensors use a turbine to measure the flow rate of a liquid.
Vortex flow sensors: These sensors use the principle of the Von Karman vortex street to measure the flow rate of a liquid.
Thermal flow sensors: These sensors use the principle of thermal conductivity to measure the flow rate of a gas.
Differential pressure flow sensors: These sensors measure the pressure drop across a restriction in a flow path to determine the flow rate of a liquid or gas.
Positive displacement flow sensors: These sensors measure the volume of liquid or gas passing through a flow path by metering it in small, fixed increments.
Overall, the choice of flow sensor will depend on the specific application and the requirements of the user.
What are the applications of flow sensors?
Flow sensors are used in a variety of applications to measure the rate of flow of liquids or gases. Some common applications include:
Industrial manufacturing: Flow sensors are used in industrial manufacturing to measure the flow rate of liquids and gases in production processes. This helps to ensure that the production process is running efficiently and that the products being produced are of consistent quality.
Automotive industry: Flow sensors are used in automotive applications to measure the flow rate of air, fuel, and other fluids in engines. This helps to optimize engine performance and improve fuel efficiency.
Medical equipment: Flow sensors are used in medical equipment such as ventilators and anesthesia machines to measure the flow rate of gases and ensure that patients are receiving the correct amount of oxygen or other gases.
Environmental monitoring: Flow sensors are used in environmental monitoring applications to measure the flow rate of water in rivers and streams, as well as in wastewater treatment plants to ensure that the treatment process is working efficiently.
HVAC systems: Flow sensors are used in heating, ventilation, and air conditioning (HVAC) systems to measure the flow rate of air and ensure that the system is providing adequate cooling or heating to the building.
Overall, flow sensors are used in a wide range of applications where accurate measurement of fluid flow is critical to the success of the process.
How do I choose the right flow sensor for my application?
Selection Guide
Flow sensors are used in a variety of applications, from measuring the flow of liquids and gases in industrial processes to monitoring water usage in households. Choosing the right flow sensor for a particular application requires consideration of several factors, including:
Flow rate range: The flow sensor should be able to measure the expected flow rate range of the application. Some sensors have a limited flow range, while others can measure a wide range of flow rates.
Fluid type: The type of fluid being measured affects the choice of flow sensor. Some sensors are designed for liquids, while others are designed for gases or steam. The fluid properties, such as viscosity, density, and conductivity, also play a role in sensor selection.
Pressure and temperature: The flow sensor should be able to operate within the expected pressure and temperature range of the application. Some sensors are designed for high-pressure and high-temperature applications, while others are not.
Accuracy and repeatability: The accuracy and repeatability of the flow sensor are important factors to consider. The level of accuracy required depends on the application, and some sensors are more accurate than others.
Installation requirements: The installation requirements of the flow sensor should be considered. Some sensors require a specific orientation or mounting position, while others can be installed in any orientation.
Maintenance requirements: The maintenance requirements of the flow sensor should also be considered. Some sensors require regular cleaning or calibration, while others do not.
Cost: The cost of the flow sensor is an important factor to consider. Some sensors are more expensive than others, and the cost should be weighed against the benefits of the sensor for the specific application.
By considering these factors, you can choose the right flow sensor for your application. It is important to consult with a flow sensor expert or manufacturer to ensure that the sensor meets the specific requirements of your application.
What are the accuracy and precision of flow sensors?
Accuracy and precision are important factors to consider when using flow sensors. The accuracy of a flow sensor refers to how close the measured value is to the actual value, while precision refers to the reproducibility of the measurements.
The accuracy of flow sensors can vary depending on the type of sensor and the application. Some flow sensors can have an accuracy of up to ±0.5%, while others may have an accuracy of ±5% or higher. Factors that can affect accuracy include the flow rate, fluid properties, and sensor design.
Precision is also important when using flow sensors, as it determines the consistency and reliability of the measurements. Precision can be affected by factors such as sensor resolution, signal noise, and environmental conditions. High-precision flow sensors can have a repeatability of up to ±0.1%, while lower precision sensors may have a repeatability of ±1% or higher.
In general, flow sensors with higher accuracy and precision tend to be more expensive and may require more calibration and maintenance. It is important to choose a flow sensor that meets the specific needs of the application in terms of accuracy, precision, and cost.
What are the installation requirements for flow sensors?
Installation Requirements:
Orientation: Flow sensors have a preferred orientation for installation, so it is important to follow the manufacturer's instructions. In general, the flow direction should be parallel to the flow sensor axis.
Pipe diameter: Flow sensors are designed to work with specific pipe diameters, so it is important to select a sensor that matches the size of the pipe.
Installation location: Flow sensors should be installed in a location that allows for accurate flow measurement. This may require a straight section of pipe before and after the sensor to eliminate turbulence and ensure a steady flow.
Electrical requirements: Flow sensors require power to operate, so it is important to ensure that the installation location has a power source available.
Calibration: Flow sensors may require calibration to ensure accuracy. This should be performed according to the manufacturer's instructions and may require specialized equipment.
Maintenance: Flow sensors should be checked regularly for proper operation and any buildup or obstructions should be removed.
How do I calibrate a flow sensor?
Calibration of a flow sensor involves adjusting the sensor to accurately measure the flow rate of a liquid or gas. The calibration process varies depending on the type of flow sensor being used. Here are some general steps to follow when calibrating a flow sensor:
Gather the necessary equipment: You will need a flow meter, a calibration fluid, a calibration stand or rig, and a computer or device to record data.
Set up the calibration stand: The stand should be set up to simulate the flow conditions of your application. This may involve adjusting the pressure, temperature, and flow rate of the calibration fluid.
Connect the flow sensor: Connect the flow sensor to the calibration stand and ensure that it is properly secured.
Record the initial readings: Take initial readings from the flow sensor and record them.
Adjust the sensor: Adjust the sensor to match the flow rate of the calibration fluid. This may involve adjusting the sensor's sensitivity or zero point.
Record the final readings: Take final readings from the flow sensor and record them.
Compare the readings: Compare the initial and final readings to ensure that the flow sensor has been properly calibrated.
Repeat if necessary: If the readings are not within an acceptable range, repeat the calibration process until the sensor is accurately calibrated.
It is important to note that some flow sensors may require specialized calibration procedures or professional calibration services. Always refer to the manufacturer's instructions for specific calibration instructions.
What is the price range of flow sensors in Australia?
Prices in Australia can vary depending on the type of sensor and its specifications. Generally, the price range for a basic flow sensor can start from around $50 AUD and go up to several thousand dollars for more advanced models with additional features. Factors that can affect the price include the type of flow measurement, the flow range, the accuracy, and the quality of materials used. It is recommended to research and compare different options before making a purchase to ensure you are getting the best value for your money.
What is the warranty period for flow sensors?
The warranty period for flow sensors can vary depending on the manufacturer and model. Some manufacturers offer a one-year warranty, while others offer a two-year or even a three-year warranty. It is important to check the specific warranty information for the flow sensor you are interested in purchasing to ensure that you are aware of the length of the warranty and any specific terms and conditions that apply. Additionally, it is always recommended to purchase flow sensors from reputable manufacturers who offer reliable products and strong customer support.
Get 3+ Quotes Now - Compare prices, availability and quality. It’s free, quick and secure.
Back to top
Flow Sensor Costs and Supplier Insights
Flow Sensor costs approximately $321.
Use Get Quotes to receive personalised prices and proposals from trusted suppliers with top reviews and excellent service.
Buy a Flow Sensor Near Me
Save time and delivery costs while getting fast support, by contacting Flow Sensor suppliers near you.