CEM DT-5503 Analogue Insulation Tester
The DT-5503 offers three insulation test ranges: 250V, 500V and 1000V, a 3Ω continuity range and a 500Ω resistance range. This meter is not only equipped with a “Live Circuit Warning” but also displays the actual AC voltage measurements of the mains supply.
Specifications |
DT-5503 |
Insulation Test |
|
DC Test Voltage |
250V 500V 1000V |
Measuring Ranges (Mid-Scale Value) |
0-100M?(1M?);0-200M?(2M?);0-400M?(4M?) |
Rated Current |
1mA DC+20%, -0% |
Output short Circuit Current |
1.3mA DC approx |
Accuracy Guaranteed Ranges |
0.05-10M? ±5%; 0.1-20 ? ±5%; 0.2 -40M? ±5%; |
Accuracy |
±7% of Scale length at ranges other than above ranges |
Continuity Test Ranges |
|
Accuracy |
±1.5% of Scale Length |
Open Circuit Voltage Output |
4.1VDC (Approx) |
Short Circuit Current Output |
210mA Min |
AC Voltage Warning |
|
AC Voltage Range |
0-600V AC for 30 seconds |
Accuracy |
±5% of Scale Length |
Input Impedance |
1.2M? |
General |
|
Withstand Voltage |
7400V AC 50Hz or 60Hz for one minute between electrical circuits and housing case |
Safety Standards |
IEC 61010-1 CAT III |
To contact OBIAT Electronics Pty Ltd about CEM DT-5503 Analogue Insulation Tester use Get a quote.
The DT-5503 offers three insulation test ranges: 250V, 500V and 1000V, a 3Ω continuity range and a 500Ω resistance range. This meter is not only equipped with a “Live Circuit Warning” but also displays the actual AC voltage measurements of the mains supply.
Specifications |
DT-5503 |
Insulation Test |
|
DC Test Voltage |
250V 500V 1000V |
Measuring Ranges (Mid-Scale Value) |
0-100M?(1M?);0-200M?(2M?);0-400M?(4M?) |
Rated Current |
1mA DC+20%, -0% |
Output short Circuit Current |
1.3mA DC approx |
Accuracy Guaranteed Ranges |
0.05-10M? ±5%; 0.1-20 ? ±5%; 0.2 -40M? ±5%; |
Accuracy |
±7% of Scale length at ranges other than above ranges |
Continuity Test Ranges |
|
Accuracy |
±1.5% of Scale Length |
Open Circuit Voltage Output |
4.1VDC (Approx) |
Short Circuit Current Output |
210mA Min |
AC Voltage Warning |
|
AC Voltage Range |
0-600V AC for 30 seconds |
Accuracy |
±5% of Scale Length |
Input Impedance |
1.2M? |
General |
|
Withstand Voltage |
7400V AC 50Hz or 60Hz for one minute between electrical circuits and housing case |
Safety Standards |
IEC 61010-1 CAT III |
To contact OBIAT Electronics Pty Ltd about CEM DT-5503 Analogue Insulation Tester use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product