Eltek - Temperature Transmitters with Inputs | Thermistor Temperature Sensors Get latest price

00 Series

• GC04 / GD04
• 1 thermistor input with measurement range -40 to +70°C. 'D' Indicates LCD display.

3 Series

• GS and GD31 / 2 / 4 / 8
• Thermistor input with measurement range -50 to +150°C. 'D' Indicates LCD display. Last digit indicates number of inputs.

GD32AL / 34AL / 32ALS / 34ALS with visual alarm

• With visual alarm. High and low alarm levels, together with alarm delay time, can be set using Eltek Darca Software. 'S' indicates visual and audible alarm.

GDM32 / GDM42 with backup memory

• The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

• All GD, GC, GL and GS series transmitters
• RP250GD repeater and RC250 receiver

To contact Connected IoT about Eltek Temperature Transmitters with Inputs | Thermistor Temperature Sensors use Get a quote.

00 Series

• GC04 / GD04
• 1 thermistor input with measurement range -40 to +70°C. 'D' Indicates LCD display.

3 Series

• GS and GD31 / 2 / 4 / 8
• Thermistor input with measurement range -50 to +150°C. 'D' Indicates LCD display. Last digit indicates number of inputs.

GD32AL / 34AL / 32ALS / 34ALS with visual alarm

• With visual alarm. High and low alarm levels, together with alarm delay time, can be set using Eltek Darca Software. 'S' indicates visual and audible alarm.

GDM32 / GDM42 with backup memory

• The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

• All GD, GC, GL and GS series transmitters
• RP250GD repeater and RC250 receiver

Read less...

To contact Connected IoT about Eltek Temperature Transmitters with Inputs | Thermistor Temperature Sensors use Get a quote.