HP Evolution-1 Character Inkjet Coder
EVOLUTION-1 is complete and ready to install right out of the box. The system includes the mounting bracketry, a hand held controller with tactile style keypad for message entry and the printhead module with internal product sensor.
Inkjet Technology by Hewlett Packard
Based on the proven Hewlett Packard thermal ink jet printhead, Evolution 1 delivers bold, fully formed characters from the first print to the last. Evolution 1 gives you a full 300 DPI at production line speeds of up to 200 feet per minute
Two character heights are supplied as standard on EVOLUTION. Print a one line message in 1/2" characters, or two lines of 7/32". Selecting the character size is accomplished through the font key on the hand held controller.
Each printhead module is manufactured with a dovetail slot on one side and a dovetail slide on the other. Up to three additional printheads can be attached on a single bracket by inserting the slide on one into the slot on the other. A small RS485 data cable is then used to connect the modules. This allows the hand held controller to network all of the printheads on the production line.
Ink Supply
Built into the printhead is a 42cc ink reservoir. Once the ink in the cartridge has been depleted, it can be taken out, disposed of and a new ink cartridge inserted in just seconds. Adding another printhead is a simple as sliding it on
Hardware Options
Software Options
Special Software Package No.1
Special Software Package No.15
Special Software Package No.2
Special Software Package No.3
To contact Trend Marking Systems about HP Evolution-1 Character Inkjet Coder use Get a quote.
EVOLUTION-1 is complete and ready to install right out of the box. The system includes the mounting bracketry, a hand held controller with tactile style keypad for message entry and the printhead module with internal product sensor.
Inkjet Technology by Hewlett Packard
Based on the proven Hewlett Packard thermal ink jet printhead, Evolution 1 delivers bold, fully formed characters from the first print to the last. Evolution 1 gives you a full 300 DPI at production line speeds of up to 200 feet per minute
Two character heights are supplied as standard on EVOLUTION. Print a one line message in 1/2" characters, or two lines of 7/32". Selecting the character size is accomplished through the font key on the hand held controller.
Each printhead module is manufactured with a dovetail slot on one side and a dovetail slide on the other. Up to three additional printheads can be attached on a single bracket by inserting the slide on one into the slot on the other. A small RS485 data cable is then used to connect the modules. This allows the hand held controller to network all of the printheads on the production line.
Ink Supply
Built into the printhead is a 42cc ink reservoir. Once the ink in the cartridge has been depleted, it can be taken out, disposed of and a new ink cartridge inserted in just seconds. Adding another printhead is a simple as sliding it on
Hardware Options
Software Options
Special Software Package No.1
Special Software Package No.15
Special Software Package No.2
Special Software Package No.3
To contact Trend Marking Systems about HP Evolution-1 Character Inkjet Coder use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product