Franklin Electric - 5hp 30 Litre Per Minute Submersible Bore Pump | FPS2A-59 Price Guide: $6,100 Get latest price

Read more...

To contact Strongman Pumps about Franklin Electric 5hp 30 Litre Per Minute Submersible Bore Pump | FPS2A-59 use Get a quote.

Single 1 Phase 5hp 30 Litre Per Minute Bore Pump

• Assembly includes pump, motor and starter.
• 4400 Tri-Seal 4-Inch Bore Pump and Motor Kit.
• 2 m³/h flow ratings
• 30 liters per min / 0.5 liters per second @ 305m head
• This FPS-2A-59TS has a 3.7kw/5hp 3-wire motor.
• The 3-wire 1 phase require a starter box which comes standard when you buy this combination.

There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below to ensure you select the correct size accessories for this model pump.

Options to purchase with your kit to suit this pump:

• Bore Cap - This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25 inch Bore Cap would be recommended.
• Shroud Adapter - A shroud adapter is only needed if you are installing a 4 inch pump down 6 inch or larger casing.
  If using 32mm pipe diameter then a 32 x 100mm (1 1/4 inch riser) PVC Shroud Adapter would be recommended.
• Electrical Cable 

                - The info below is a guide only, you must check with your electrician on cable size.

                - 1 Phase Cable (3-wire/4 core) – 4mm sq cable up to 40m

                - Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.

• Stainless Steel Support Cable - Available in 3mm cable or 4mm cable
• Stainless Steel Support Cable Grips/Clamps - Available in 3mm or 4mm to suit S/S Cable
• Pressure Gauges - Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa
• Flexible Pipe

                - Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.

                - Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.

                - As well as the Couplings, ties, joiners and installation roller.

• Single 1 Phase Motor Protection - If you purchase a single phase 3-wire kit, then you will need a Pumptec Plus as your motor protection device.

***3 Year Warranty

View the 5hp 30 Litre Per Minute Submersible Bore Pump | FPS2A-59

Read less...

To contact Strongman Pumps about Franklin Electric 5hp 30 Litre Per Minute Submersible Bore Pump | FPS2A-59 use Get a quote.