Herma Stand Alone Label Applicator | C ...

Herma - Stand Alone Label Applicator | C Series

Supplier: Result Group of Companies

Stand Alone Label Applicator | C Series

The HERMA 152C Standard and the 152C Prisma – a label applicator range that masters every challenge of wrap-around labelling, even when confronted with tricky labelling tasks.

38 Recent Views In Stock

C Series Label Applicators

The HERMA 152C Standard and the 152C Prisma – a label applicator range that masters every challenge of wrap-around labelling, even when confronted with tricky labelling tasks. Flexibly designed to accept an optional printing unit (hot-foil printing for instance) as well as motorised unwinders and rewinders for a higher output capability. The tested HERMA 152C Prisma technology guarantees precise labelling, even if the product has minor geometric variations. Spiral misalignment is practically eliminated and labelling in orientation, including twin labelling, is no longer a problem. The roller-type prism can be adjusted simply by means of a scale for different product diameters – additional change parts are now a thing of the past.

HERMA 362C – Side label applicator

A compact, sturdy labelling machine that works without change parts. The advantage: quick, straightforward and flexible retooling for precise side labelling. This system is distinguished by its outstanding production efficiency in combination with low investment costs. A synchronous top belt can be used to stabilize the products. The modular system can be fitted with either one or two HERMA 400 applicators equipped with a pivot beak. A printer can be installed if required to allow for optional label overprinting, such as the date of manufacture or a sell-by date.

HERMA 452C – Top label applicator

Compact, reliable, state-of-the-art technology for top labelling of a wide range of products and food packaging, etc. This label applicator machine can be supplied either with a fixed dispensing beak and a sprung-loaded application roller or with a pivot beak. The pivot beak allows for the precise linear labelling of objects with large dimensional tolerances, irregularities or recesses (such as margarine packs etc).

HERMA 552C – Base label applicator

The proven solution for base labelling of products. This label applicator is equipped with a fixed dispensing beak and a label recognition unit. Label application is taken care of by the conveyor belt in order to ensure maximum efficiency. Products that are already transported in the correct positon (in a production line, for instance) no longer need to be turned over for labelling. The label applicator can be retracted from under the conveyor belt in order to change the label roll.

HERMA 652C – Top and base label applicator

A highly efficient combination of the top labeller 452C and the bottom labeller 552C that guarantees optimum productivity and flexibility. If both top and bottom labelling are required, the two steps can be completed in a single pass. Of course, the 652C can also be used for top or bottom labelling only.

HERMA 752C – Top, front face and base label applicator

The HERMA 752C automatically applies in one pass, a three panel label to the top, front and ase on a wide range of rays including fresh meat, produce and ready meals. The HERMA 752C facilitates quick changeovers in the very busiest of production environments. This label applicator system is suitable for all environments and when not applying three panel labels the 752C can be utilised for standard top labelling operations.