Single Station Industrial Tap Timer | Pope Digiset
Single Station Industrial Tap Timer | Pope Digiset
Single Station Industrial Tap Timer | Pope Digiset
Single Station Industrial Tap Timer | Pope Digiset
Single Station Industrial Tap Timer | Pope Digiset
The Pope DigiSet single-station tap timer offers a colourful solution to start automating your garden watering. A large, easy-to-read display makes setting up a simple process.
Description
In Stock
The programable Start Time, Run Time, and Frequency allow you to get the most efficient watering for your plants or lawn.
Product features:
1 minute to 12 hours Run Time
Frequency range from every 2 minutes to once every 7 days
Suits 25mm/20mm garden tap outlets
Easy Manual mode
2 x AA batteries required (not included)
2 Year warranty
UV treated to Australian conditions
Blue, Green, Orange, and Red colours are available
Maximum operating pressure 800kpa.
Please Note Colour may vary.
We recommend placing a pressure regulator before the timer as pressure spikes or excess pressure from the supply line may cause damage to the valve when the valve opens. This can void the warranty. Also keep in mind placement of the unit as frost can cause damage to the internals of the unit, even if switched off for the winter and left out.
If pressure is an issue, we recommend a better-suited timer such as a 25mm valved unit such as a Galcon 7101, Hunter Node, or Toro Tempus.
To contact Hills Irrigation about Hills Irrigation Single Station Industrial Tap Timer | Pope Digiset use Get a quote.
The programable Start Time, Run Time, and Frequency allow you to get the most efficient watering for your plants or lawn.
Product features:
1 minute to 12 hours Run Time
Frequency range from every 2 minutes to once every 7 days
Suits 25mm/20mm garden tap outlets
Easy Manual mode
2 x AA batteries required (not included)
2 Year warranty
UV treated to Australian conditions
Blue, Green, Orange, and Red colours are available
Maximum operating pressure 800kpa.
Please Note Colour may vary.
We recommend placing a pressure regulator before the timer as pressure spikes or excess pressure from the supply line may cause damage to the valve when the valve opens. This can void the warranty. Also keep in mind placement of the unit as frost can cause damage to the internals of the unit, even if switched off for the winter and left out.
If pressure is an issue, we recommend a better-suited timer such as a 25mm valved unit such as a Galcon 7101, Hunter Node, or Toro Tempus.