Hypertherm - Powermax45 XP 240V Hand Plasma Cutter. 6.1m Leads Get latest price

Advantages
- Small size and light weight provide exceptional portability for a 16mm rated cutting system.
- Operator friendly patented drag-cutting technology.
- Smart Sense™ technology ensures that air pressure is always accurate.
- CNC interface enabled.
- FastConnect™ torch connection allows both handheld and mechanized use.
- Extensive array of specialty consumables for fine feature cutting, extended reach cutting, gouging, precision gouging, and marking.
- High-impact and heat resistant.
- SpringStart™ technology ensures consistent starting and optimum torch performance.

CAPACITY
Cutting:
- 16mm (5/8") at 500mm/min (20 ipm)
- 22mm (7/8") at 250mm/min (10 ipm)

Severance:
- 29mm (1-1/8") at 125 mm/min (5 ipm)

Pierce:
- 12mm (1/2")

Gouging:
- 3-4kg per hour

SPECIFICATIONS
- Input Voltage: 240V
- Output: 10-45A
- Duty Cycle:
- 50% @ 45 A, 230 V, 1Ph
- 60% @ 41 A, 230 V, 1Ph
- 100% @ 32 A, 230 V, 1Ph
- Weight: 15kg
- Size: 442mmD x 173mmW x 357mmH
- Recommended Gas:
- Cutting: Air (clean, dry and oil-free), Nitrogen, F5
- Gouging: Air (clean, dry and oil-free), Nitrogen, F5
- Marking: Air (clean dry and oil-free) Argon
- Recommended Gas Flow/Pressure: 188 I/min (400 scfh) @ 5,9 bar (90 psi)
- Engine Drive Requirements: 10kW (45A output)

To contact ACL Industrial Technology about Hypertherm Powermax45 XP 240V Hand Plasma Cutter. 6.1m Leads use Get a quote.

Advantages
- Small size and light weight provide exceptional portability for a 16mm rated cutting system.
- Operator friendly patented drag-cutting technology.
- Smart Sense™ technology ensures that air pressure is always accurate.
- CNC interface enabled.
- FastConnect™ torch connection allows both handheld and mechanized use.
- Extensive array of specialty consumables for fine feature cutting, extended reach cutting, gouging, precision gouging, and marking.
- High-impact and heat resistant.
- SpringStart™ technology ensures consistent starting and optimum torch performance.

CAPACITY
Cutting:
- 16mm (5/8") at 500mm/min (20 ipm)
- 22mm (7/8") at 250mm/min (10 ipm)

Severance:
- 29mm (1-1/8") at 125 mm/min (5 ipm)

Pierce:
- 12mm (1/2")

Gouging:
- 3-4kg per hour

SPECIFICATIONS
- Input Voltage: 240V
- Output: 10-45A
- Duty Cycle:
- 50% @ 45 A, 230 V, 1Ph
- 60% @ 41 A, 230 V, 1Ph
- 100% @ 32 A, 230 V, 1Ph
- Weight: 15kg
- Size: 442mmD x 173mmW x 357mmH
- Recommended Gas:
- Cutting: Air (clean, dry and oil-free), Nitrogen, F5
- Gouging: Air (clean, dry and oil-free), Nitrogen, F5
- Marking: Air (clean dry and oil-free) Argon
- Recommended Gas Flow/Pressure: 188 I/min (400 scfh) @ 5,9 bar (90 psi)
- Engine Drive Requirements: 10kW (45A output)

Read less...

To contact ACL Industrial Technology about Hypertherm Powermax45 XP 240V Hand Plasma Cutter. 6.1m Leads use Get a quote.