Innovec | Injection Controllers | IAI Get latest price

Innovec | Injection Controllers | IAI

34 Recent Views In Stock

The IAI Controller combines with an additive injection manifold to provide a compact additive injection system. The system is configured by push buttons on the instrument face, a four-button infrared remote control or RS485 communication from a host.

Features

• Simple touch switch set up with English statement prompts by approved IR remote
• Low cost - High performance
• Programmable dual channel quadrature input or single pulse train with DIP switch selection for turbine, reed switch & open collector
• Background total for main flow and additive flow
• Dual 4-20mA output with Proportional and Integral algorithm control from the main and additive flow signal for modulating valve control for continuous dispensing of additive
• Main flow and additive flow rate display
• Sensor supply that can be adjusted from 8 to 20VDC
• Micro SD card for 8GB for storage of batching data
• 85 to 265VAC 47-63 Hz universal supply or factory fitted 10 to 40VDC isolated supply

Specification

Input Details

• The IAI accepts a dual channel input from 0 to 2KHZ and is DIP switch selectable for open collector, reed, Hall and turbine signals (from 20mV peak to peak)

Standard features

• External squirt button included on EXD housing
• Injector block size 4 [.01 to 1.0 LPM] selection size by application
• Injector block size 6 [.03 to 1.66 LPM] selection size by application
• Injector block size 8 [.25 to 10.0 LPM] selection size by application
• Controller accuracy +/- 0.5% with a repeatability of +/- 0.25%

Display

• The IAI incorporates a 64x128 dot graphics module with RGB backlight in English

Infrared Remote

• Four button IR remote is potted in epoxy and complies with AS/NZS 60079.18: 2005

Environmental Parameters

• -20 to 50°C
• Humidity 5-95%
• Protection class to IP66
• Approvals IECEX (enclosure)

Electrical Parameters

• 4 of voltage free inputs 24VDC tolerant
• 6 of open collector outputs 24VDC tolerant @ 200mAmpere
• 1 of timed open collector output 24VDC tolerant @ 200mAmpere
• 4 of relay outputs 240VAC tolerant SSR @ 2Ampere with external snubber or
• 4 of relay outputs 240VAC tolerant mechanical@ 2Ampere with external snubber
• Communications: Isolated 2 wire RS485 with Modbus RTU protocol

Power Supply

85 to 265VAC 47-63 Hz or DC to DC converter isolator from 10 to 40VDC. An adjustable transducer power supply of 8 to 20VDC at 30mA is incorporated.

Mounting Details

• Surface mounting IP66 plastic enclosure of case dimensions 200mm wide x 200mm high x 95mm deep with fixing centres of 182mm wide x182mm high by M4 screws.
• 6 of M20 cable entries available for user connection
• Weight is 2kg

Ordering Information

• Model Structure: model/input/display/power supply/options
• Sample Number: IAIP/2xB/0-99999999/VAC

Read more...

To contact Innovec Controls about Innovec | Injection Controllers | IAI use Get a quote.

The IAI Controller combines with an additive injection manifold to provide a compact additive injection system. The system is configured by push buttons on the instrument face, a four-button infrared remote control or RS485 communication from a host.

Features

• Simple touch switch set up with English statement prompts by approved IR remote
• Low cost - High performance
• Programmable dual channel quadrature input or single pulse train with DIP switch selection for turbine, reed switch & open collector
• Background total for main flow and additive flow
• Dual 4-20mA output with Proportional and Integral algorithm control from the main and additive flow signal for modulating valve control for continuous dispensing of additive
• Main flow and additive flow rate display
• Sensor supply that can be adjusted from 8 to 20VDC
• Micro SD card for 8GB for storage of batching data
• 85 to 265VAC 47-63 Hz universal supply or factory fitted 10 to 40VDC isolated supply

Specification

Input Details

• The IAI accepts a dual channel input from 0 to 2KHZ and is DIP switch selectable for open collector, reed, Hall and turbine signals (from 20mV peak to peak)

Standard features

• External squirt button included on EXD housing
• Injector block size 4 [.01 to 1.0 LPM] selection size by application
• Injector block size 6 [.03 to 1.66 LPM] selection size by application
• Injector block size 8 [.25 to 10.0 LPM] selection size by application
• Controller accuracy +/- 0.5% with a repeatability of +/- 0.25%

Display

• The IAI incorporates a 64x128 dot graphics module with RGB backlight in English

Infrared Remote

• Four button IR remote is potted in epoxy and complies with AS/NZS 60079.18: 2005

Environmental Parameters

• -20 to 50°C
• Humidity 5-95%
• Protection class to IP66
• Approvals IECEX (enclosure)

Electrical Parameters

• 4 of voltage free inputs 24VDC tolerant
• 6 of open collector outputs 24VDC tolerant @ 200mAmpere
• 1 of timed open collector output 24VDC tolerant @ 200mAmpere
• 4 of relay outputs 240VAC tolerant SSR @ 2Ampere with external snubber or
• 4 of relay outputs 240VAC tolerant mechanical@ 2Ampere with external snubber
• Communications: Isolated 2 wire RS485 with Modbus RTU protocol

Power Supply

85 to 265VAC 47-63 Hz or DC to DC converter isolator from 10 to 40VDC. An adjustable transducer power supply of 8 to 20VDC at 30mA is incorporated.

Mounting Details

• Surface mounting IP66 plastic enclosure of case dimensions 200mm wide x 200mm high x 95mm deep with fixing centres of 182mm wide x182mm high by M4 screws.
• 6 of M20 cable entries available for user connection
• Weight is 2kg

Ordering Information

• Model Structure: model/input/display/power supply/options
• Sample Number: IAIP/2xB/0-99999999/VAC

Read less...

To contact Innovec Controls about Innovec | Injection Controllers | IAI use Get a quote.