Launch Key Programmer Module POA

Launch - Key Programmer Module POA

Supplier: Launch Tech Australia

Key Programmer Module POA

In Stock

LAUNCH’s new advanced Immobiliser & Key Programmer Module is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, LAUNCH Key Programmer Module enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

Features:

1. Compatible with X-431 series diagnostic scanners, LAUNCH Key Programmer Module enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Advantages

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.4.

Specification

Interface	DB26, DB15
Input Power	DC12V
Working CurrentMax	500mA
Power Consumption	5W
Storage Temperature	-20?~70?
Working Temperature	0?~50?
Size	228*120 mm

To contact Launch Tech Australia about Launch Key Programmer Module POA use Get a quote.

Features:

2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.

3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.

4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

Advantages

1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).

2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.

3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.

4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.

5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.

6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

Core Functions

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.

2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.

3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;

5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.

6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.

7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.

8. Supports the BMW CAS4/CAS4+ module replacement.

9. Supports the ECU cloning and replacement for BMW Siemens engines.

10. Erase the password for Mercedes-Benz engine and gearbox within 3S.

11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.4.

Specification

Interface	DB26, DB15
Input Power	DC12V
Working CurrentMax	500mA
Power Consumption	5W
Storage Temperature	-20?~70?
Working Temperature	0?~50?
Size	228*120 mm

Read less...

To contact Launch Tech Australia about Launch Key Programmer Module POA use Get a quote.

Let Launch Tech Australia provide you with a quote

Supplier

Get a quote

Supplier: Launch Tech Australia

Distribution: Australia & New Zealand

Location: Minchinbury, NSW

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. Launch Tech Australia are also proudly displaying these credentials:

Established:

2001

Employees:

6-20

Memberships:

AAAA

Distribution:

Australia & New Zealand

Location:

Minchinbury , NSW

Joined:

Mar 2023