Seco Milling | Minimaster
It’s in fact the most versatile and flexible system on the market today with over 600 combinations and possibilities per size, MM06-MM16, including tools for producing slots, square shoulder milling, centre drilling, chamfering, double angle chamfering, plunging and copy milling both with carbide, CBN and PCD.
And it is a system with maximum stability thanks to the rich offering of shank types and lengths. It’s always possible with Minimaster to optimise between accessibility and stability in the machining process.
The Minimaster system is growing and new items this year are:
3 flute Copy milling inserts
In the new Machining Navigator Milling the full range of 3-flute ball nose inserts (B90) diameter Ø6 - Ø20 mm have been added. There are three types for each diameter -E, -M, and –D.
-E geometry are mainly intended for semi-finishing and finishing.
-M and –D geometries are intended for roughing operations.
Double angle chamfer inserts
The double angle chamfer inserts are available for MM06 in Ø8 mm and MM12 in Ø16 mm, which allows chamfering of both sides on a vertical slot with the same tool. There are two types of these inserts: 45° and 30°.
Plunge milling inserts
Plunging inserts are also new in the Minimaster program. Two different versions -PL and –PLP are available.
PL is intended for roughing operations and is available from MM06 - MM16.
PLP is intended for finishing operations and both types give best possible performance depending on duty.
Plunging is a fast grooving milling method and the plunging inserts are perfect when long overhang is used due to that the cutting forces are in the axial direction where it is most stable.
Improved coating on all Minimaster grades
All cemented carbide grades for Minimaster (F30M, F40M, T60M and F15M) have a new, more wear resistant coating. The coating consists of (Ti, Al)N (titanium aluminium nitride) with a high aluminium content, 70 %.
This means that the new coating manages higher temperatures and the inserts can be used at higher cutting speeds and/or for dry machining.
To contact Seco Tools Australia about Seco Milling | Minimaster use Get a quote.
It’s in fact the most versatile and flexible system on the market today with over 600 combinations and possibilities per size, MM06-MM16, including tools for producing slots, square shoulder milling, centre drilling, chamfering, double angle chamfering, plunging and copy milling both with carbide, CBN and PCD.
And it is a system with maximum stability thanks to the rich offering of shank types and lengths. It’s always possible with Minimaster to optimise between accessibility and stability in the machining process.
The Minimaster system is growing and new items this year are:
3 flute Copy milling inserts
In the new Machining Navigator Milling the full range of 3-flute ball nose inserts (B90) diameter Ø6 - Ø20 mm have been added. There are three types for each diameter -E, -M, and –D.
-E geometry are mainly intended for semi-finishing and finishing.
-M and –D geometries are intended for roughing operations.
Double angle chamfer inserts
The double angle chamfer inserts are available for MM06 in Ø8 mm and MM12 in Ø16 mm, which allows chamfering of both sides on a vertical slot with the same tool. There are two types of these inserts: 45° and 30°.
Plunge milling inserts
Plunging inserts are also new in the Minimaster program. Two different versions -PL and –PLP are available.
PL is intended for roughing operations and is available from MM06 - MM16.
PLP is intended for finishing operations and both types give best possible performance depending on duty.
Plunging is a fast grooving milling method and the plunging inserts are perfect when long overhang is used due to that the cutting forces are in the axial direction where it is most stable.
Improved coating on all Minimaster grades
All cemented carbide grades for Minimaster (F30M, F40M, T60M and F15M) have a new, more wear resistant coating. The coating consists of (Ti, Al)N (titanium aluminium nitride) with a high aluminium content, 70 %.
This means that the new coating manages higher temperatures and the inserts can be used at higher cutting speeds and/or for dry machining.
To contact Seco Tools Australia about Seco Milling | Minimaster use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product