Motorized Tension/Compression Test Stands ...
ESM1500 and ESM750 single-column force testers are highly configurable solutions for tension and compression measurement applications, with capacities of 1,500 lbF (6.7 kN) and 750 lbF (3.4 kN), respectively. With generous travel and clearance, they are suitable for break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more.
Satisfy various test methods through an intuitive menu with selectable test parameters, such as speed, number of cycles, etc. Up to 50 profiles may be saved and password protected. Crosshead positioning for sample setup is a breeze with available FollowMe®. Using your hand as your guide, push and pull on the load to move the crosshead at a dynamically variable speed.
The stands feature a unique modular controller function platform. Functions such as travel measurement, cycling, etc. are offered individually, accommodating a wide range of budgets and applications.
Collect force and travel data, plot and analyze results, and control test stand motion via MESUR®gauge Plus software. Or, fully control the stand by a PC through a custom application.
Can be used with a variety of grips and force gauges.
ESM1500S | ESM1500 | ESM750 | ESM750S | |||
1,500 lbF [6.7 kN] | 1,500 lbF [6.7 kN] | 750 lbF [3.4 kN] | 750 lbF [3.4 kN] | |||
14.2 in [360 mm] travel | 32 in [813 mm] travel | 32 in [813 mm] travel | 14.2 in [360 mm] travel |
|
Control panel tabletop mounting kit For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting. |
||
Data collection & motion control software Note: MESUR®gauge Plus does not require any optional test stand functions, such as PC Control. If force vs. travel vs. time output is required, order the Travel Indication option. See below section for details. |
||
Indicators Choose from three indicators. Consider a Model 7i or 5i to take advantage of all available test stand functions. |
||
Series R01 force sensors S-beam load cells for use with any Mark-10 indicator. Capacities from 50 to 2,000 lbF (250 N to 10 kN). |
||
Series R03 force sensors Inline force sensors for use with any Mark-10 indicator. Capacities available from 0.25 to 100 lbF (1 to 500 N). |
||
Load cell hardware kit Set of mounting hardware to mount any Series R01 load cell up to 2,000 lbF capacity and any Series R03 force sensor. Can also be adapted to other manufacturers' load cells with #10-32, 1/4-28, and 1/2-20 mounting threads. Note that Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for LC test stand models, ex. ESM750LC. |
||
Force gauges Choose from several gauge series. Consider a Series 7 or 5 gauge to take advantage of all available test stand functions. |
||
Base plate, matrix of holes Features a matrix of #10-32 threaded holes and a 1/2-20 center hole, ideal for custom fixture mounting. |
||
Base plate, three hole sizes #10-32, 5/16-18, and 1/2-20 holes are provided, along with an array of four 1/4-28 holes. |
||
Remote emergency switch Convenient for when the standard emergency switch is inaccessible, for example if a safety shield is used. Includes an 8’ (2.4 m) cable, and plugs directly into the rear of the test stand. The standard, attached emergency switch remains operational while the remote switch is plugged in. |
||
Grips and fixtures Choose from a wide range of tensile and compression grips and fixtures. |
||
Eye end adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges. |
||
|
Feature | Part No. | Description | Requirements | |
FollowMe™ force-based positioning | SF008 | Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning. |
|
|
Travel indication | SF009 | Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated. |
|
|
Computer control | SF010 |
Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR®gauge Plus software. |
|
|
Programmable travel limits | SF011 | The stand stops at or cycles between programmable upper and lower travel distances. |
|
|
Overload protection | SF012 | Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges. |
|
|
Auto return | SF013 | The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit. |
|
|
Cycling / dwell time | SF014 | Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds. |
|
|
Independent Up and Down speeds | SF016 | Individually specify speeds for the up and down directions. |
- |
|
Low speed extension | SF017 | Extends the standard speed range down to 0.001 in/min (0.02 mm/min). |
- |
|
High speed extension |
SF018 SF018-1 |
ESM1500 / ESM1500S: Extends max speed to 90 in/min (2,300 mm/min). ESM750 / ESM750S: Extends max speed to 60 in/min (1,525 mm/min). |
- |
|
Break detection | SF019 | Crosshead stops at a programmable drop in force. |
|
|
Loadholding | SF020 | Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time. |
|
|
Preload / sample touch | SF021 | Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications. |
|
|
Profiles | SF022 | Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored. | - | |
Complete options package |
SFCOMP (ESM1500 / ESM750) SFCOMP-1 (ESM1500S / ESM750S) |
Includes all functions listed above. Requires a Series 7 or 5 gauge or indicator. |
||
ESM1500 | ESM1500S | ESM750 | ESM750S | |
Load capacity: | 1,500 lbF [6.7 kN] at < 60 in [1,525 mm]/min 1,000 lbF [4.5 kN] at > 60 in [1,525 mm]/min |
750 lbF [3.4 kN] at < 35 in [900 mm]/min 500 lbF [2.3 kN] at > 35 in [900 mm]/min |
||
Maximum travel distance: | 32.0 in [813 mm] | 14.2 in [360 mm] | 32.0 in [813 mm] | 14.2 in [360 mm] |
Standard speed range: | 0.5 - 24 in/min [10 - 600 mm/min] | |||
Available speed range: | 0.001 - 90 in/min [0.02 - 2,300 mm/min] | 0.001 - 60 in/min [0.02 - 1,525 mm/min] | ||
Speed setting accuracy: | ±0.2% of setting | |||
Speed variation with load: | ±0% [stepper motor driven] | |||
Travel accuracy*: | ±0.002 in. per 10 in. [±0.05 mm per 250 mm] | |||
Travel resolution: | 0.001 in [0.02 mm] | |||
Limit switch repeatability: | ±0.001 in [0.03 mm] | |||
Power: | Universal input 80-240 VAC, 50/60 Hz, 450W |
Universal input 80-240 VAC, 50/60 Hz, 120 W |
||
Weight: | 198 lb [90 kg] | 160 lb [72 kg] | 185 lb [84 kg] | 150 lb [68 kg] |
Shipping weight: | 248 lb [113 kg] | 206 lb [93 kg] | 236 lb [107 kg] | 196 lb [88 kg] |
Warranty: | 3 years [see individual statement for further details] | |||
Conformance: | CE mark | |||
* Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance. | ||||
All test stands are supplied with the following accessories: (1) AC1047-2 eye end kit
Shown at left: Model ESM1500LC |
Example of available Grips:
|
|
|
|
|
|
|
|
|
|
|
|
For all available grips, see grips.
Other stands available:
ESM303 - Motorised Test Stand
The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments.
ESM303H
The ESM303H is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the load cell to move the crosshead at a variable rate of speed.
For more information or a quote on this Motorized Tension/Compression Test Stand please call or use the IndustrySearch email enquiry for for a fast direct reply.
To contact IDM Instruments about Motorized Tension/Compression Test Stands | ESM1500 / ESM750 | MARK-10 use Get a quote.
ESM1500 and ESM750 single-column force testers are highly configurable solutions for tension and compression measurement applications, with capacities of 1,500 lbF (6.7 kN) and 750 lbF (3.4 kN), respectively. With generous travel and clearance, they are suitable for break testing, cycling, limit testing to a load or distance, loadholding, elongation testing, tensile testing, compression testing, and more.
Satisfy various test methods through an intuitive menu with selectable test parameters, such as speed, number of cycles, etc. Up to 50 profiles may be saved and password protected. Crosshead positioning for sample setup is a breeze with available FollowMe®. Using your hand as your guide, push and pull on the load to move the crosshead at a dynamically variable speed.
The stands feature a unique modular controller function platform. Functions such as travel measurement, cycling, etc. are offered individually, accommodating a wide range of budgets and applications.
Collect force and travel data, plot and analyze results, and control test stand motion via MESUR®gauge Plus software. Or, fully control the stand by a PC through a custom application.
Can be used with a variety of grips and force gauges.
ESM1500S | ESM1500 | ESM750 | ESM750S | |||
1,500 lbF [6.7 kN] | 1,500 lbF [6.7 kN] | 750 lbF [3.4 kN] | 750 lbF [3.4 kN] | |||
14.2 in [360 mm] travel | 32 in [813 mm] travel | 32 in [813 mm] travel | 14.2 in [360 mm] travel |
|
Control panel tabletop mounting kit For applications requiring remote use of the control panel. Features an adjustable viewing angle and a base with thru holes for bench mounting. |
||
Data collection & motion control software Note: MESUR®gauge Plus does not require any optional test stand functions, such as PC Control. If force vs. travel vs. time output is required, order the Travel Indication option. See below section for details. |
||
Indicators Choose from three indicators. Consider a Model 7i or 5i to take advantage of all available test stand functions. |
||
Series R01 force sensors S-beam load cells for use with any Mark-10 indicator. Capacities from 50 to 2,000 lbF (250 N to 10 kN). |
||
Series R03 force sensors Inline force sensors for use with any Mark-10 indicator. Capacities available from 0.25 to 100 lbF (1 to 500 N). |
||
Load cell hardware kit Set of mounting hardware to mount any Series R01 load cell up to 2,000 lbF capacity and any Series R03 force sensor. Can also be adapted to other manufacturers' load cells with #10-32, 1/4-28, and 1/2-20 mounting threads. Note that Series R01 and R03 load cell part numbers ending in -1 (ex: MR01-500-1) include mounting hardware for LC test stand models, ex. ESM750LC. |
||
Force gauges Choose from several gauge series. Consider a Series 7 or 5 gauge to take advantage of all available test stand functions. |
||
Base plate, matrix of holes Features a matrix of #10-32 threaded holes and a 1/2-20 center hole, ideal for custom fixture mounting. |
||
Base plate, three hole sizes #10-32, 5/16-18, and 1/2-20 holes are provided, along with an array of four 1/4-28 holes. |
||
Remote emergency switch Convenient for when the standard emergency switch is inaccessible, for example if a safety shield is used. Includes an 8’ (2.4 m) cable, and plugs directly into the rear of the test stand. The standard, attached emergency switch remains operational while the remote switch is plugged in. |
||
Grips and fixtures Choose from a wide range of tensile and compression grips and fixtures. |
||
Eye end adapters Allow for quick grip installation and removal, and prevent grip rotation. Mount to common test frames, load cells, and force gauges. |
||
|
Feature | Part No. | Description | Requirements | |
FollowMe™ force-based positioning | SF008 | Position the crosshead by manually pushing or pulling on the force gauge shaft or load cell. Increasing force produces greater speeds. Ideal for setups and quick positioning. |
|
|
Travel indication | SF009 | Position is indicated on the control unit display, with output via USB. An internal scale utilizing Renishaw technology produces significantly higher accuracy than with conventional rotary encoder-based designs. Backlash and nonlinearity are virtually eliminated. |
|
|
Computer control | SF010 |
Fully control the stand and force gauge / indicator via custom-written application in any language supporting ASCII communications. Also responds to the legacy Chatillon TCD command set and legacy Nexygen TCD software (not available from Mark-10). This option is not required for MESUR®gauge Plus software. |
|
|
Programmable travel limits | SF011 | The stand stops at or cycles between programmable upper and lower travel distances. |
|
|
Overload protection | SF012 | Protects a force gauge or force sensor against overload. Also compatible with many competitors’ gauges. |
|
|
Auto return | SF013 | The crosshead moves to a limit switch, force set point, travel position, or break, then stops and reverses direction at full speed to the opposite limit. |
|
|
Cycling / dwell time | SF014 | Same as auto-return, but programmable up to 99,999 cycles. Programmable dwell time at upper and lower limits up to 9,999 seconds. |
|
|
Independent Up and Down speeds | SF016 | Individually specify speeds for the up and down directions. |
- |
|
Low speed extension | SF017 | Extends the standard speed range down to 0.001 in/min (0.02 mm/min). |
- |
|
High speed extension |
SF018 SF018-1 |
ESM1500 / ESM1500S: Extends max speed to 90 in/min (2,300 mm/min). ESM750 / ESM750S: Extends max speed to 60 in/min (1,525 mm/min). |
- |
|
Break detection | SF019 | Crosshead stops at a programmable drop in force. |
|
|
Loadholding | SF020 | Dynamically adjusts the crosshead position to maintain a specified load for an indefinite or specified period of time. |
|
|
Preload / sample touch | SF021 | Stops the crosshead and/or zeroes the travel display at an initial preload - useful in tensile, spring, elongation, and other applications. |
|
|
Profiles | SF022 | Save and recall sets of test parameters, such as speeds, travel limits, preload, etc. Maximum of 50 profiles may be stored. | - | |
Complete options package |
SFCOMP (ESM1500 / ESM750) SFCOMP-1 (ESM1500S / ESM750S) |
Includes all functions listed above. Requires a Series 7 or 5 gauge or indicator. |
||
ESM1500 | ESM1500S | ESM750 | ESM750S | |
Load capacity: | 1,500 lbF [6.7 kN] at < 60 in [1,525 mm]/min 1,000 lbF [4.5 kN] at > 60 in [1,525 mm]/min |
750 lbF [3.4 kN] at < 35 in [900 mm]/min 500 lbF [2.3 kN] at > 35 in [900 mm]/min |
||
Maximum travel distance: | 32.0 in [813 mm] | 14.2 in [360 mm] | 32.0 in [813 mm] | 14.2 in [360 mm] |
Standard speed range: | 0.5 - 24 in/min [10 - 600 mm/min] | |||
Available speed range: | 0.001 - 90 in/min [0.02 - 2,300 mm/min] | 0.001 - 60 in/min [0.02 - 1,525 mm/min] | ||
Speed setting accuracy: | ±0.2% of setting | |||
Speed variation with load: | ±0% [stepper motor driven] | |||
Travel accuracy*: | ±0.002 in. per 10 in. [±0.05 mm per 250 mm] | |||
Travel resolution: | 0.001 in [0.02 mm] | |||
Limit switch repeatability: | ±0.001 in [0.03 mm] | |||
Power: | Universal input 80-240 VAC, 50/60 Hz, 450W |
Universal input 80-240 VAC, 50/60 Hz, 120 W |
||
Weight: | 198 lb [90 kg] | 160 lb [72 kg] | 185 lb [84 kg] | 150 lb [68 kg] |
Shipping weight: | 248 lb [113 kg] | 206 lb [93 kg] | 236 lb [107 kg] | 196 lb [88 kg] |
Warranty: | 3 years [see individual statement for further details] | |||
Conformance: | CE mark | |||
* Because load cell deflection and system deflection are present and not automatically compensated for, this equipment is recommended for applications requiring at least 0.2 in [5 mm] of travel distance. | ||||
All test stands are supplied with the following accessories: (1) AC1047-2 eye end kit
Shown at left: Model ESM1500LC |
Example of available Grips:
|
|
|
|
|
|
|
|
|
|
|
|
For all available grips, see grips.
Other stands available:
ESM303 - Motorised Test Stand
The ESM303 is a highly configurable single-column force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments.
ESM303H
The ESM303H is a highly configurable horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN], with a rugged design suitable for laboratory and production environments. Sample setup and fine positioning are a breeze with available FollowMe™ force-based positioning - using your hand as your guide, push and pull on the load cell to move the crosshead at a variable rate of speed.
For more information or a quote on this Motorized Tension/Compression Test Stand please call or use the IndustrySearch email enquiry for for a fast direct reply.
To contact IDM Instruments about Motorized Tension/Compression Test Stands | ESM1500 / ESM750 | MARK-10 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product