PNZ | Vertical Tubular Pump
Vertical tubular casing pump with axial propeller. Pump inlet with bellmouth or suction elbow, pull-out design available, discharge nozzle arranged above or below floor, flanges to DIN or ANSI standards available.
Q (50Hz) | 5,000.0 – 65,000.0 (m³/h) |
H (50Hz) | 7.0 – 15.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage, high voltage |
No. of impeller entries | Single entry |
Type of installation | Long-coupled |
Type of coupling | Direct, Gear |
Type of lubrication | Oil / Product lubrication |
Max. permissible fluid temperature | 80.0 (°C) |
Maximum operating pressure | PN 6, PN 9 |
Pump set location | Wet well |
Suction characteristics | Non-priming |
Type of casing | Tubular casing |
Type of impeller | Axial, Propeller |
Type of connection | Flange |
UNSPSC classification | 4015150300 |
eClass assignment | 36410000, 36410106, 36410100 |
Installation position | Vertical |
Shaft seal type | Gland packing, Mechanical seal |
Main applications | Waste water / sewage, Energy, Water |
Casing material | Carbon steel, Duplex steel, Chrome nickel steel |
Type of installation | Stationary |
Maximum speed of rotation | 990.0 (1/min) |
To contact KSB Australia about PNZ | Vertical Tubular Pump use Get a quote.
Vertical tubular casing pump with axial propeller. Pump inlet with bellmouth or suction elbow, pull-out design available, discharge nozzle arranged above or below floor, flanges to DIN or ANSI standards available.
Q (50Hz) | 5,000.0 – 65,000.0 (m³/h) |
H (50Hz) | 7.0 – 15.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage, high voltage |
No. of impeller entries | Single entry |
Type of installation | Long-coupled |
Type of coupling | Direct, Gear |
Type of lubrication | Oil / Product lubrication |
Max. permissible fluid temperature | 80.0 (°C) |
Maximum operating pressure | PN 6, PN 9 |
Pump set location | Wet well |
Suction characteristics | Non-priming |
Type of casing | Tubular casing |
Type of impeller | Axial, Propeller |
Type of connection | Flange |
UNSPSC classification | 4015150300 |
eClass assignment | 36410000, 36410106, 36410100 |
Installation position | Vertical |
Shaft seal type | Gland packing, Mechanical seal |
Main applications | Waste water / sewage, Energy, Water |
Casing material | Carbon steel, Duplex steel, Chrome nickel steel |
Type of installation | Stationary |
Maximum speed of rotation | 990.0 (1/min) |
To contact KSB Australia about PNZ | Vertical Tubular Pump use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product