Powered Process Indicator | DIBCD Get latest price

Read more...

To contact Innovec Controls about Powered Process Indicator | DIBCD use Get a quote.

The DIBCD Powered Process Indicator is a 120/240VAC or 12-40VDC powered 4.5 digit (19999 count) microprocessor based process indicator supplied in a panel mount enclosure with a 14.2mm high LED display which accepts BCD input levels from 5-50VDC in voltage source or open collector format.

Features:

• Low cost - high performance
• Screw terminal electrical connection
• 5 to 50VDC BCD input level
• Multiplex or direct drive inputs
• Direct interface to PLC
• 120 or 240VAC 47-63 Hz or factory fitted 12 to 40VDC supply
• Polarity indication
• High contrast LED display
• 14.2mm digit height
• Touch switch programming of decimal point, display intensity and voltage source or open collector input
• Panel mounting 48x96mm DIN enclosure
• Australian design and manufacture

Specifications:

• Input Details: The instrument accepts BCD, binary and hexadecimal information in multiplexed or direct drive format with voltage levels from 5 to 50VDC in voltage source or open collector. Input bias current is 1mA per input line. There is an independent strobe pulse per digit.
• Displays: A 4.5 digit high contrast light emitting diode (LED) with a 14.2mm digit height, a wide viewing angle and a viewing distance of 5 metres.
• Decimal Points: Four (4) positions programmable from the front panel.
• Environmental Parameters
  • 0-70 degrees Celsius
  • 0-90% rh NON condensing
• Instrument Power Supply: 120/240VAC 47-63 Hz or factory fitted DC to DC converter from 12 to 40VDC.
• Weight: 200 grams
• Mounting Details: Panel mounting plastic enclosure of case dimensions 96mm wide by 48mm high by 140mm deep with a panel cut out of 93mm wide by 45mm high.
• Ordering Information
  • The part number is configured as
  • Model/input signal/display units/power supply
  • Sample number: DIBCD/CC/0-999.9/VAC
  • All units shipped factory calibrated to 0-999.9

The DIBCD is an advanced instrument which have been designed and manufactured in Australia. The instrument's function is to accept 4 bit data in BCD, hexadecimal or binary form, with input voltage levels from 5 to 50VDC and display that information on a high contrast 4.5 digit (20,000 counts) LED display with a digit height of 14.2mm. Polarity indication is included. The DIBCD accepts data for direct drive per digit or in multiplexed form with an independent strobe input per digit.

The DIBCD is supplied in a plastic enclosure measuring 48 x 96 x 120mm deep including the rear mount two part screw terminal.

Read less...

To contact Innovec Controls about Powered Process Indicator | DIBCD use Get a quote.