USB Data Acquisition Module | USB-1608G
The USB-1608G features a maximum sampling rate of 250kS/s and 16-bit analog inputs that are software-selectable as 16 Single Ended (SE) or eight Differential (DIFF) inputs with programmable ranges of ±10 V, ±5 V, ±2 V, or ±1 V. The USB-1608G has an external digital trigger input. Triggering is also software selectable for edge-or level-sensitive mode and can be configured as edge-sensitive for rising or falling edge. In level-sensitive mode, you can configure for either high or low level. The default setting at power up is edge-sensitive, rising edges. In retrigger mode, you can set up repetitive analog input trigger events where the trigger is automatically re-armed after the defined number of samples is taken.
The USB-1608G also has Eight digital I/O individually configurable for input or output. The DIO terminals can detect the state of any TTL-level input and can be set to pull-up (+5 V) or pull-down (0 V) via a jumper. The USB-1608G Multifunction DAQ module includes two 32-bit event counters for counting TTL pulses accepting frequency inputs of up to 20 MHz. USB-1608G has a PWM timer output that can generate a pulse output with a programmable frequency in the range of 0.0149 Hz to 32 MHz. The USB-1608G also provides one external clock input and one external clock output for the analog inputs.
With its extensive list of features the USB1608G provides exceptional performance and unprecedented value for money and comes with everything you need to begin acquiring, viewing, and storing data. Our comprehensive software package includes Tracer DAQ, the easy to use out of the box application as well as our support for popular software packages and developers. The USB-1608G also supports DAQFlex, the new message based DAQ open source cross platform software.
To contact Firetail DAQ about USB Data Acquisition Module | USB-1608G use Get a quote.
The USB-1608G features a maximum sampling rate of 250kS/s and 16-bit analog inputs that are software-selectable as 16 Single Ended (SE) or eight Differential (DIFF) inputs with programmable ranges of ±10 V, ±5 V, ±2 V, or ±1 V. The USB-1608G has an external digital trigger input. Triggering is also software selectable for edge-or level-sensitive mode and can be configured as edge-sensitive for rising or falling edge. In level-sensitive mode, you can configure for either high or low level. The default setting at power up is edge-sensitive, rising edges. In retrigger mode, you can set up repetitive analog input trigger events where the trigger is automatically re-armed after the defined number of samples is taken.
The USB-1608G also has Eight digital I/O individually configurable for input or output. The DIO terminals can detect the state of any TTL-level input and can be set to pull-up (+5 V) or pull-down (0 V) via a jumper. The USB-1608G Multifunction DAQ module includes two 32-bit event counters for counting TTL pulses accepting frequency inputs of up to 20 MHz. USB-1608G has a PWM timer output that can generate a pulse output with a programmable frequency in the range of 0.0149 Hz to 32 MHz. The USB-1608G also provides one external clock input and one external clock output for the analog inputs.
With its extensive list of features the USB1608G provides exceptional performance and unprecedented value for money and comes with everything you need to begin acquiring, viewing, and storing data. Our comprehensive software package includes Tracer DAQ, the easy to use out of the box application as well as our support for popular software packages and developers. The USB-1608G also supports DAQFlex, the new message based DAQ open source cross platform software.
To contact Firetail DAQ about USB Data Acquisition Module | USB-1608G use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product