Utile - Vane Compressor | LGA12-LGB32 Get latest price

The LG series of aircooled gas compressors has been designed to work continuously at pressures upto 25 psig or 75 psig as the second stage in a two-stage compressor system. Rugged construction coupled with many years of development ensures long life and high efficiency for these compressors that are available as bareshaft or complete packaged units. The simple design of the rotary vane compressor with few moving parts ensures operational reliability, low noise levels and minimal maintenance. A mechanical lubricator at the rear end provides lubrication for the cylinder and bearings.
Special tools are not required to replace or inspect the vanes for wear and all the cylinders, coverplates and rotors are manufactured in Ductile Iron.

Some features of this sliding vane compressors:

• The shaft is mounted on roller bearings at both ends and the rotor is axially located at the drive end by a ball bearing
• Deep fins are cast into the cylinder to assist cool running and the cylinder is bored to a fine finish to ensure long vane life, and low noise levels
• The sliding vanes are manufactured from a Kevlar based material having excellent wearing properties

To contact Hurll Nu-Way about Utile Vane Compressor | LGA12-LGB32 use Get a quote.

The LG series of aircooled gas compressors has been designed to work continuously at pressures upto 25 psig or 75 psig as the second stage in a two-stage compressor system. Rugged construction coupled with many years of development ensures long life and high efficiency for these compressors that are available as bareshaft or complete packaged units. The simple design of the rotary vane compressor with few moving parts ensures operational reliability, low noise levels and minimal maintenance. A mechanical lubricator at the rear end provides lubrication for the cylinder and bearings.
Special tools are not required to replace or inspect the vanes for wear and all the cylinders, coverplates and rotors are manufactured in Ductile Iron.

Some features of this sliding vane compressors:

• The shaft is mounted on roller bearings at both ends and the rotor is axially located at the drive end by a ball bearing
• Deep fins are cast into the cylinder to assist cool running and the cylinder is bored to a fine finish to ensure long vane life, and low noise levels
• The sliding vanes are manufactured from a Kevlar based material having excellent wearing properties

Read less...

To contact Hurll Nu-Way about Utile Vane Compressor | LGA12-LGB32 use Get a quote.