Valveco Resilient Seated Gate Valves
The ductile iron gate is fully encapsulated in EPDM rubber to ensure a tight seal. A Grade SS431 stainless steel stem allows for strength and corrosion resistance. A back-seal facility allows for replacement of stem seals under pressure. Grade SS316 bolts and fasteners provided for added corrosion resistance.
The Valveco Series 728 Resilient Seated Gate Valves from HMA Flow & Industrial feature a full port design. The stem nut is separated from the gate for easy opening and closing, with cast integral feet for safe and easy storage. Lifting eye bolts make for easy installation (150 mm and over). Both clockwise and anti-clockwise closing are available, with key, hand wheel, and gearbox operators. The Valveco Series 728 is suitable for drinking water, wastewater, and other liquids, for above-ground and underground applications.
Sizes are DN50-600 (2?”to 24?”), a maximum working pressure of 1 600 kPa, a maximum working temperature of 60°C, flanged or socket end connections, SAI approved to AS2638.2, 2006 (sizes 80 mm to 30mm), and epoxy coated to AS4158 300 um minimum DFT.
Features:
- Ductile iron body and bonnet for high strength and impact resistance
- Ductile iron gate fully encapsulated in EPDM rubber to ensure tight seal
- Grade SS431 stainless steel stem for strength and corrosion resistance
- Back seal facility to allow replacement of stem seals under pressure
- SS316 bolts and fasteners for corrosion resistance
- Full port design
- Stem nut is separated from the gate for easy opening and closing
- Cast integral feet for safe and easy storage
- Lifting eye bolts for easy installation (150mm and over)
- Available in both clockwise and anti-clockwise closing
- Key, hand wheel and gearbox operators available
- Suitable for drinking water, waste water and other liquids
- Available for above ground and underground applications
Technical Data
- Sizes: DN50-600 (2”- 24”)
- Max.Working Pressure: 1600kpa
- Max.Working Temperature: 60° C
- Flanged Or Socket End Connections
- SAI Approved To AS2638.2, 2006
- Epoxy Coated To AS4158 300um minimum DFT
To contact HMA Group about Valveco Resilient Seated Gate Valves use Get a quote.
The ductile iron gate is fully encapsulated in EPDM rubber to ensure a tight seal. A Grade SS431 stainless steel stem allows for strength and corrosion resistance. A back-seal facility allows for replacement of stem seals under pressure. Grade SS316 bolts and fasteners provided for added corrosion resistance.
The Valveco Series 728 Resilient Seated Gate Valves from HMA Flow & Industrial feature a full port design. The stem nut is separated from the gate for easy opening and closing, with cast integral feet for safe and easy storage. Lifting eye bolts make for easy installation (150 mm and over). Both clockwise and anti-clockwise closing are available, with key, hand wheel, and gearbox operators. The Valveco Series 728 is suitable for drinking water, wastewater, and other liquids, for above-ground and underground applications.
Sizes are DN50-600 (2?”to 24?”), a maximum working pressure of 1 600 kPa, a maximum working temperature of 60°C, flanged or socket end connections, SAI approved to AS2638.2, 2006 (sizes 80 mm to 30mm), and epoxy coated to AS4158 300 um minimum DFT.
Features:
- Ductile iron body and bonnet for high strength and impact resistance
- Ductile iron gate fully encapsulated in EPDM rubber to ensure tight seal
- Grade SS431 stainless steel stem for strength and corrosion resistance
- Back seal facility to allow replacement of stem seals under pressure
- SS316 bolts and fasteners for corrosion resistance
- Full port design
- Stem nut is separated from the gate for easy opening and closing
- Cast integral feet for safe and easy storage
- Lifting eye bolts for easy installation (150mm and over)
- Available in both clockwise and anti-clockwise closing
- Key, hand wheel and gearbox operators available
- Suitable for drinking water, waste water and other liquids
- Available for above ground and underground applications
Technical Data
- Sizes: DN50-600 (2”- 24”)
- Max.Working Pressure: 1600kpa
- Max.Working Temperature: 60° C
- Flanged Or Socket End Connections
- SAI Approved To AS2638.2, 2006
- Epoxy Coated To AS4158 300um minimum DFT
To contact HMA Group about Valveco Resilient Seated Gate Valves use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product