AerService - Centrifugal Fan | EV Fan

Centrifugal Fan | EV Fan

A centrifugal fan for extraction of light welding and exhaust fumes, and particulate

In Stock

The EV is a single inlet centrifugal fan suitable to move air with low dust concentration. The low flow and low pressure characteristics allow for a variety of uses for this fan (with extraction arms) to guarantee optimal yields (low energy consumption) with low noise impact.

Key Features

Structure: made entirely of welded sheet steel of adequate thickness and painted with epoxy powders in black RAL 9005.
Impellers: curved forward-lined blades, made of galvanized steel sheet and statically and dynamically balanced according to ISO Standards, keeping noise and vibrations at minimum levels.
Options: ATEX versions available.

Typical Environments

For use in welding, industry and automotive environments where there is a requirement for fume and light dust extraction.

Accessories

Soundproof cabin for centrifugal fans - without ventilation
Electrical panel
RPI-M - automatic control system for extraction systems
Encased 4-Pole Selector

Specifications

Fan model:	EV15 \| EV18 \| EV30
Power (kW):	1.1 \| 1.5 \| 2.2
RPM:	2850
Flow rate (m³/h):	200-3000
Pressure (Pa):	320-1800
Impeller Ø min-max mm:	130 - 250
Volt:	400V/50-60Hz
IP Rating:	IP55
Fluid limit temp (min-max) Celsius	-25 \| +60
Noise (dB(A)):	74.1 \| 74.1 \| 77
Packaged weight :	60kg (max)
Location:	Fixed

To contact Dynamic Engineering Australia about AerService Centrifugal Fan | EV Fan use Get a quote.

Key Features

Structure: made entirely of welded sheet steel of adequate thickness and painted with epoxy powders in black RAL 9005.
Impellers: curved forward-lined blades, made of galvanized steel sheet and statically and dynamically balanced according to ISO Standards, keeping noise and vibrations at minimum levels.
Options: ATEX versions available.

Typical Environments

For use in welding, industry and automotive environments where there is a requirement for fume and light dust extraction.

Accessories

Soundproof cabin for centrifugal fans - without ventilation
Electrical panel
RPI-M - automatic control system for extraction systems
Encased 4-Pole Selector

Specifications

Fan model:	EV15 \| EV18 \| EV30
Power (kW):	1.1 \| 1.5 \| 2.2
RPM:	2850
Flow rate (m³/h):	200-3000
Pressure (Pa):	320-1800
Impeller Ø min-max mm:	130 - 250
Volt:	400V/50-60Hz
IP Rating:	IP55
Fluid limit temp (min-max) Celsius	-25 \| +60
Noise (dB(A)):	74.1 \| 74.1 \| 77
Packaged weight :	60kg (max)
Location:	Fixed