Ascon Temperature Controller | KM1

Ascon - Temperature Controller | KM1

Temperature Controller | KM1

KM1 Ascon Tecnologic Kube temperature controller with independent timer

25 Recent Views In Stock

The KM1 is an advanced 48 x 48mm controller with advanced features such as a dynamic display that changes colours depending on distance of process value from setpoint, an energy saving standby mode, configuration storage on a programming key that can then be transferred to other controllers, user calibration allowing for sensor correction, a 5 function timer and a working hours/days counter as well as a wattmeter for measuring instantaneous and integrated power consumption.

Dimensions: 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminals)
Double LED display:
- Main Display: 4 digit, 3 dynamic colors red, green and amber h 15.5 mm
- Secondary Display: 4 digit, green h 7 mm
1 input for temperature probes: tc J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990O@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
1 or 2 digital inputs for free voltage contacts, depending on the configuration code of the instrument (the second digital input is an alternative to OUT4)
Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%)
-Frequency: 50/60 Hz
Power consumption: 7 VA max.
Outputs (3 relays max.): SPST-NO 4A/240 Vac or SSR discrete voltage output
One programmable output/input: voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
3 configurable alarms as absolute, deviation and band
4 selectable set points
Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
Independent timer with 5 operating modes
EVOgreen function: stand by mode of display (selectable)
Wattmeter for the calculation of the instantaneous power and energy consumed
Hour counters: a cumulative non-erasable counter and a second counter with resettable alarm
Connections: 16 screw terminals 2.5 mm² (AWG14 AWG22. ..) fixed, removable or clamp type

To contact Practical Control Solutions about Ascon Temperature Controller | KM1 use Get a quote.

Dimensions: 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminals)
Double LED display:
- Main Display: 4 digit, 3 dynamic colors red, green and amber h 15.5 mm
- Secondary Display: 4 digit, green h 7 mm
1 input for temperature probes: tc J, K, S, R, T, J and K infrared sensors, RTD PT1000 and Pt 100 2-wire, PTC KTY81-121 (990O@25°C); NTC 103AT- 2 (10k@25°C), for mV signals 0/12 ... 60 mV or normalized signals 0/4 ... 20 mA, 0/1 ... 5 V, 0/2 ... 10 V
Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% of span ± 1 digit
1 or 2 digital inputs for free voltage contacts, depending on the configuration code of the instrument (the second digital input is an alternative to OUT4)
Power supply: 24 VAC / VDC ± 10%, 100 ... 240 VAC / VDC (-15% / +10%)
-Frequency: 50/60 Hz
Power consumption: 7 VA max.
Outputs (3 relays max.): SPST-NO 4A/240 Vac or SSR discrete voltage output
One programmable output/input: voltage to drive SSR 13V @ 1mA max, 10.5 min @ 15 mA ± 10% or power transmitter, or digital input
3 configurable alarms as absolute, deviation and band
4 selectable set points
Serial Communications: TTL (standard) + RS 485 (optional) isolated, MODBUS RTU (JBUS)
PID control with single or double action with overshoot control, ON/OFF, ON/OFF Neutral Zone, Auto-tuning, Self-tuning
Independent timer with 5 operating modes
EVOgreen function: stand by mode of display (selectable)
Wattmeter for the calculation of the instantaneous power and energy consumed
Hour counters: a cumulative non-erasable counter and a second counter with resettable alarm
Connections: 16 screw terminals 2.5 mm² (AWG14 AWG22. ..) fixed, removable or clamp type