BendPak Parking Vehicle Lift | HD-973PX

BendPak - Parking Vehicle Lift | HD-973PX

Supplier: Genesis Equipment

Parking Vehicle Lift | HD-973PX

9K & 7K Cap. / Tri-Level Parking Lift / Extended / High Lift / SPECIAL ORDER

In Stock

Specifications

Extended length, high rise
Perfect for parking, storage and service
7,000 lb. capacity upper deck
9,000 lb. capacity lower deck
Superstructure features durable powder coat finish
Perfect for cars, trucks, and SUVs
Platforms feature full-length aluminum decking
Rugged welded-steel construction
Powerful hydraulic cylinders
Heavy-duty 3/8” lifting cable
Heavy-duty steel construction
Wide base-plate for maximum stability
Heavy-duty steel construction
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze
Integrated hydraulic flow restrictor provides controlled descent in event of hose rupture
Reliable electric-hydraulic power system
Runways feature non-skid surface
Multi-position safety locks in each column
Automatic safety locks combined with redundant anti-fall devices
Adjustable lock ladders
Independent backup slack-cable safety latches
Push-button pneumatic safety release.
Padded trip bar with limit switch prevents lower vehicle from making contact with upper platform.
Simple controls
Optional drive-thru ramps available
Optional 4,500-lb. air-hydraulic rolling jacks available

Style: Multi-Level Parking Lift

Top Platform

Lifting Capacity*	7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle	3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle	3,500 lbs. (1,588 kg)
A – Overall Width	112″ (2,849 mm)
B – Overall Length	252.25″ (6,409 mm)
C – Height of Columns	245″ (6,227 mm)
D – Drive-thru Clearance	87″ (2,201 mm)
E – Maximum Rise	151.5″ (3,849 mm)
F – Maximum Lifting Height	156.5″ (3,972 mm)
G – Distance Between Columns	100″ (2,546 mm)
H – Runway Width	19″ (482 mm)
I – Width Between Runways	44″ (1,121 mm)
J – Runway Length	199″ (?5,056 mm)
Min. Wheelbase @ rated Capacity¹	1?40″ (3,?556 mm)
Min. Wheelbase @ 75% Capacity¹	1?20″ (?3,084 mm)
Min. Wheelbase @ 50% Capacity¹	100″ (2,?540 mm)
Min. Wheelbase @ 25% Capacity¹	80″ (2,032 mm)
Locking Positions	34
Locking Spacing	Every 4″ (102 mm)
Lifting Time to Max. Rise	90 seconds
Motor	220 VAC / 60 Hz / 1 Ph

Bottom Platform

Lifting Capacity*	9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle	4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle	4,500 lbs. (2,041 kg)
A – Overall Width	112″ (2,842 mm)
B – Overall Length	252.25″ (6,409 mm)
C – Height of Columns	245″ (6,227 mm)
D – Drive-thru Clearance	90.25″ (2,2?95 mm)
E – Maximum Rise	82.25″ (?2,088 mm)
F – Maximum Lifting Height	87.25″ (?2,211 mm)
G – Distance Between Columns	100″ (2,546 mm)
H – Runway Width	19″ (482 mm)
I – Width Between Runways	44″ (1,?121 mm)
J – Runway Length	186.75″ (4,?744 mm)
Min. Wheelbase @ rated Capacity¹	1?35″ (3,?429 mm)
Min. Wheelbase @ 75% Capacity¹	1?15″ (2,?921 mm)
Min. Wheelbase @ 50% Capacity¹	95″ (2,?413 mm)
Min. Wheelbase @ 25% Capacity¹	7?5″ (1,?905 mm)
Locking Positions	16
Locking Spacing	Every 4″ (102 mm)
Lifting Time to Max. Rise	50 seconds
Motor	220 VAC / 60 Hz / 1 Ph

¹The Lift supports less weight than its rated capacity when the vehicle’s wheelbase is shorter; this is because the wheels of such a vehicle are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a vehicle with a wheelbase of 95″ is 50 percent of the Lift’s rated capacity (or 3,500 lbs. when the rated capacity is 7,000 lbs.).

Patent Pending – Applied for in the U.S. and Abroad

112″ (2,849 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

To contact Genesis Equipment about BendPak Parking Vehicle Lift | HD-973PX use Get a quote.

Specifications

Extended length, high rise
Perfect for parking, storage and service
7,000 lb. capacity upper deck
9,000 lb. capacity lower deck
Superstructure features durable powder coat finish
Perfect for cars, trucks, and SUVs
Platforms feature full-length aluminum decking
Rugged welded-steel construction
Powerful hydraulic cylinders
Heavy-duty 3/8” lifting cable
Heavy-duty steel construction
Wide base-plate for maximum stability
Heavy-duty steel construction
Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze
Integrated hydraulic flow restrictor provides controlled descent in event of hose rupture
Reliable electric-hydraulic power system
Runways feature non-skid surface
Multi-position safety locks in each column
Automatic safety locks combined with redundant anti-fall devices
Adjustable lock ladders
Independent backup slack-cable safety latches
Push-button pneumatic safety release.
Padded trip bar with limit switch prevents lower vehicle from making contact with upper platform.
Simple controls
Optional drive-thru ramps available
Optional 4,500-lb. air-hydraulic rolling jacks available

Style: Multi-Level Parking Lift

Top Platform

Lifting Capacity*	7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle	3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle	3,500 lbs. (1,588 kg)
A – Overall Width	112″ (2,849 mm)
B – Overall Length	252.25″ (6,409 mm)
C – Height of Columns	245″ (6,227 mm)
D – Drive-thru Clearance	87″ (2,201 mm)
E – Maximum Rise	151.5″ (3,849 mm)
F – Maximum Lifting Height	156.5″ (3,972 mm)
G – Distance Between Columns	100″ (2,546 mm)
H – Runway Width	19″ (482 mm)
I – Width Between Runways	44″ (1,121 mm)
J – Runway Length	199″ (?5,056 mm)
Min. Wheelbase @ rated Capacity¹	1?40″ (3,?556 mm)
Min. Wheelbase @ 75% Capacity¹	1?20″ (?3,084 mm)
Min. Wheelbase @ 50% Capacity¹	100″ (2,?540 mm)
Min. Wheelbase @ 25% Capacity¹	80″ (2,032 mm)
Locking Positions	34
Locking Spacing	Every 4″ (102 mm)
Lifting Time to Max. Rise	90 seconds
Motor	220 VAC / 60 Hz / 1 Ph

Bottom Platform

Lifting Capacity*	9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle	4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle	4,500 lbs. (2,041 kg)
A – Overall Width	112″ (2,842 mm)
B – Overall Length	252.25″ (6,409 mm)
C – Height of Columns	245″ (6,227 mm)
D – Drive-thru Clearance	90.25″ (2,2?95 mm)
E – Maximum Rise	82.25″ (?2,088 mm)
F – Maximum Lifting Height	87.25″ (?2,211 mm)
G – Distance Between Columns	100″ (2,546 mm)
H – Runway Width	19″ (482 mm)
I – Width Between Runways	44″ (1,?121 mm)
J – Runway Length	186.75″ (4,?744 mm)
Min. Wheelbase @ rated Capacity¹	1?35″ (3,?429 mm)
Min. Wheelbase @ 75% Capacity¹	1?15″ (2,?921 mm)
Min. Wheelbase @ 50% Capacity¹	95″ (2,?413 mm)
Min. Wheelbase @ 25% Capacity¹	7?5″ (1,?905 mm)
Locking Positions	16
Locking Spacing	Every 4″ (102 mm)
Lifting Time to Max. Rise	50 seconds
Motor	220 VAC / 60 Hz / 1 Ph