BulletPro STD6246TAD 2 post clear floor ...
BulletPro STD6246TAD-H2 2 post clear floor lift 4.6 ton
Can be installed symmetrically or asymmetrically
Overrall hoist height 3862 mm
Lifting capacity 4600 kg
Manual lock release for unlock and lower down
Remote control for lock and lift up
Ultra low lift pad just 88 mm
Only 100 mm concrete depth required
Feature: Great Value for Money
The posts can installed asymmetrical (open car doors wider). or symmetric (more drive through width between the columns).
· The post design incorporates special Double S bends to increase column strength
· Top bar and top cross bar can be installed in narrow or wide, high or low setting
· 3 stage telescoping front arms and 2 stage rears arms,
· Comes with 80 mm load arm adaptors and holders, remote control for up and lock, rubber protectors mounted to the carriage , rubber column guards, remote control, tool trays on arms.
· Standard 3 phase or optional single phase motor
· The motor can be fitted in a high up position on the front of the post (out of the way) to save working space or close to wall
Spec
Lifting Capacity |
4600kg |
Max Lift height |
1794 mm-1938 mm |
Min. height |
88mm |
Motor standard: 3 phase 3.0kw 4 speed 1400 rpm or optional 240V 1 phase 2.2kw 2 speed 2800 rpm |
|
Weight |
750 kg |
Overall height |
3862 mm |
Overall width - symmetrical install position |
3436 mm |
Overall width - asymmetrical install position |
3501 mm |
Lifting up time |
45-58 sec |
Noise level |
75dB |
Operation temperature |
-10 to 40 °C |
To contact Interequip Pty Ltd about BulletPro STD6246TAD 2 post clear floor lift 4.6 ton symmetrical or asymmetrical use Get a quote.
BulletPro STD6246TAD-H2 2 post clear floor lift 4.6 ton
Can be installed symmetrically or asymmetrically
Overrall hoist height 3862 mm
Lifting capacity 4600 kg
Manual lock release for unlock and lower down
Remote control for lock and lift up
Ultra low lift pad just 88 mm
Only 100 mm concrete depth required
Feature: Great Value for Money
The posts can installed asymmetrical (open car doors wider). or symmetric (more drive through width between the columns).
· The post design incorporates special Double S bends to increase column strength
· Top bar and top cross bar can be installed in narrow or wide, high or low setting
· 3 stage telescoping front arms and 2 stage rears arms,
· Comes with 80 mm load arm adaptors and holders, remote control for up and lock, rubber protectors mounted to the carriage , rubber column guards, remote control, tool trays on arms.
· Standard 3 phase or optional single phase motor
· The motor can be fitted in a high up position on the front of the post (out of the way) to save working space or close to wall
Spec
Lifting Capacity |
4600kg |
Max Lift height |
1794 mm-1938 mm |
Min. height |
88mm |
Motor standard: 3 phase 3.0kw 4 speed 1400 rpm or optional 240V 1 phase 2.2kw 2 speed 2800 rpm |
|
Weight |
750 kg |
Overall height |
3862 mm |
Overall width - symmetrical install position |
3436 mm |
Overall width - asymmetrical install position |
3501 mm |
Lifting up time |
45-58 sec |
Noise level |
75dB |
Operation temperature |
-10 to 40 °C |
To contact Interequip Pty Ltd about BulletPro STD6246TAD 2 post clear floor lift 4.6 ton symmetrical or asymmetrical use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product