Detonation Flame Arrestor | Model 7A00
Its primary function is to allow the flow of gases or vapor of flammable liquids through the enclosure, but prevent the transmission of a flame. The element inside the housing provides an extinguishing barrier to the ignited vapor mixture by absorbing heat from the flame. The Model 7A00 is used as an independent safety system to ensure explosion protection. TECHNIQUE 7A00 flame arrestors are designed on the principle of "quenching gap". The crimped SST metal element allows vapor to pass through in order to allow a vessel to breath, yet prevents the propagation of a flame from the exposed side to the protected side. CONSTRUCTION Housing Material: Carbon Steel, Stainless Steel. Trim Material: Stainless Steel (1.4571) element. Standard element is suitable for explosion group IIA, IIB3 and IIC flammable gases and vapors. Elements for other gas groups are available upon request.
How it Works The 7A00 flame arrestors are designed on the principle of "quenching gap". The crimped SST metal element allows vapor to pass through in order to allow a vessel to breath, yet prevents the propagation of a flame from the exposed side to the protected side.
Construction Housing Material: Carbon Steel, Stainless Steel. Trim Material: Stainless Steel (1.4571) element. Standard element is suitable for explosion group IIA, IIB3 and IIC flammable gases and vapors. Elements for other gas groups are available upon request.
Features The Model 7A00 is designed, manufactured, and tested according to Directive 2014/34/EU (ATEX114) and ISO 16852. The element design is bidirectional and available for horizontal or vertical installations.
Easy Maintenance: The Model 7A00 detonation flame arrestor is a passive device with no moving parts. The flame cell element can be easily removed for inspection and cleaning in appropriate solvent solution.
Sizes: Units are available in DN20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300 (3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 8", 10", 12") line sizes; thread connections according to ISO7/1, BS21 or ASME B1.20.1. Standard for flange connections to EN1092-1 PN10, ASME B16.5 150#RF or JIS B 2220 10K.
To contact Pressure and Safety Systems about Detonation Flame Arrestor | Model 7A00 use Get a quote.
Its primary function is to allow the flow of gases or vapor of flammable liquids through the enclosure, but prevent the transmission of a flame. The element inside the housing provides an extinguishing barrier to the ignited vapor mixture by absorbing heat from the flame. The Model 7A00 is used as an independent safety system to ensure explosion protection. TECHNIQUE 7A00 flame arrestors are designed on the principle of "quenching gap". The crimped SST metal element allows vapor to pass through in order to allow a vessel to breath, yet prevents the propagation of a flame from the exposed side to the protected side. CONSTRUCTION Housing Material: Carbon Steel, Stainless Steel. Trim Material: Stainless Steel (1.4571) element. Standard element is suitable for explosion group IIA, IIB3 and IIC flammable gases and vapors. Elements for other gas groups are available upon request.
How it Works The 7A00 flame arrestors are designed on the principle of "quenching gap". The crimped SST metal element allows vapor to pass through in order to allow a vessel to breath, yet prevents the propagation of a flame from the exposed side to the protected side.
Construction Housing Material: Carbon Steel, Stainless Steel. Trim Material: Stainless Steel (1.4571) element. Standard element is suitable for explosion group IIA, IIB3 and IIC flammable gases and vapors. Elements for other gas groups are available upon request.
Features The Model 7A00 is designed, manufactured, and tested according to Directive 2014/34/EU (ATEX114) and ISO 16852. The element design is bidirectional and available for horizontal or vertical installations.
Easy Maintenance: The Model 7A00 detonation flame arrestor is a passive device with no moving parts. The flame cell element can be easily removed for inspection and cleaning in appropriate solvent solution.
Sizes: Units are available in DN20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300 (3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 8", 10", 12") line sizes; thread connections according to ISO7/1, BS21 or ASME B1.20.1. Standard for flange connections to EN1092-1 PN10, ASME B16.5 150#RF or JIS B 2220 10K.
To contact Pressure and Safety Systems about Detonation Flame Arrestor | Model 7A00 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product