Digital Ultrasonic Flaw Detector | Tru-Sonic Get latest price

Digital Ultrasonic Flaw Detector | Tru-Sonic

28 Recent Views In Stock

In addition to this, Tru-Sonic includes many extra features to help make your work easier. For example, in weld testing the exact flaw location is evaluated; all features are available for demanding thickness measurements. User-friendly programs for display evaluation with Distance Amplitude Curves (DAC) and for AVG evaluation are available.

Measurement Features

-High resolution TFT display
-Large thickness display
-DAC curve
-Optional Distance Varied Gain
-Positive, negative, and minimum depth alarms
-Filled waveform trace display
-Freeze mode
-Peak memory mode
-Separately Gate A and Gate B setting
-Echo-Echo measurement
-Peak or flank measurement
-RF display
-Time-B-scan
-Encoder B-scan
-Pulse Repetition frequency Control
-Standard Dual Gate with alarm
-Superior minimum Thickness Range
-Fast 60Hz display update rate
-Displays sound path leg and its value, surface distance
and depth to flaw for angle beam inspections
-Large Thcikness display
-Spare Battery can on-Side charge direct through AC/DC charger

Specifications

• Calibration range:From 25 to 6000 mm (steel long).
• Sound velocity:2 fixed values(3240m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s
• Probe delay: 0 to 365
• Gain: 100dB, adjustable in steps of 1/2/6/12, also can set up the step gain you need.
• Frequency range:0.5-10 MHz wide band.
• Pulse repetition frequency:10-1000Hz, depending on the set calibration range and the probe delay for adjustable Test methods:Pulse echo mode and Thru mode.
• Damping:100 and 200 ohm
• Echo presentation:Full wave, RF
• Suppression:Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display
• DAC: Recording of up to 8 reference echoes, 40dB dynamic range,
• Display of the DAC curve 3 or 4 DAC curve can be setting
• Data storage:1000 set.nbsp;A-scan Trace Data sets in the FLASH memory, with additional alphanumeric identification and directory function.
• Units of measure: mm or inch
• Direct documentation: Hardcopy (contents of display), active measurement reading, test report or thickness report, via the
• RS-232 interface to computer
• Interface:RS-232 C (bidirectional) or USB for PC computer.
• Analog output:Proportional voltage for amplitude and sound path of the echo in the gate; TTL signal for gate alarm
• Probe connector:Two LEMO1 equivalent compatible connectors
• Power supply:Removable 8800mAh/7.2V Li-ion Battery or mains supply via an external mains power/charger unit JBD15-A2S
• Operational period: 6-8nbsp;hours with Battery ( select LCD low bright )
• Battery charge indication: On the display
• Display size:Screen: 112mmx98mm (LxW)
• Dimensions: 238mmx158mmx52mm (LxWxD)
• Weight:1.75Kg for Tru-Sonic

 

Read more...

To contact Australian NDT Sales about Digital Ultrasonic Flaw Detector | Tru-Sonic use Get a quote.

In addition to this, Tru-Sonic includes many extra features to help make your work easier. For example, in weld testing the exact flaw location is evaluated; all features are available for demanding thickness measurements. User-friendly programs for display evaluation with Distance Amplitude Curves (DAC) and for AVG evaluation are available.

Measurement Features

-High resolution TFT display
-Large thickness display
-DAC curve
-Optional Distance Varied Gain
-Positive, negative, and minimum depth alarms
-Filled waveform trace display
-Freeze mode
-Peak memory mode
-Separately Gate A and Gate B setting
-Echo-Echo measurement
-Peak or flank measurement
-RF display
-Time-B-scan
-Encoder B-scan
-Pulse Repetition frequency Control
-Standard Dual Gate with alarm
-Superior minimum Thickness Range
-Fast 60Hz display update rate
-Displays sound path leg and its value, surface distance
and depth to flaw for angle beam inspections
-Large Thcikness display
-Spare Battery can on-Side charge direct through AC/DC charger

Specifications

• Calibration range:From 25 to 6000 mm (steel long).
• Sound velocity:2 fixed values(3240m/s,5920m/s) and adjustable in the range 1000 to 9999m/s in steps of 1m/s
• Probe delay: 0 to 365
• Gain: 100dB, adjustable in steps of 1/2/6/12, also can set up the step gain you need.
• Frequency range:0.5-10 MHz wide band.
• Pulse repetition frequency:10-1000Hz, depending on the set calibration range and the probe delay for adjustable Test methods:Pulse echo mode and Thru mode.
• Damping:100 and 200 ohm
• Echo presentation:Full wave, RF
• Suppression:Linear, 0 to 90% screen height adjustable in steps of 1%, status indication on the display
• DAC: Recording of up to 8 reference echoes, 40dB dynamic range,
• Display of the DAC curve 3 or 4 DAC curve can be setting
• Data storage:1000 set.nbsp;A-scan Trace Data sets in the FLASH memory, with additional alphanumeric identification and directory function.
• Units of measure: mm or inch
• Direct documentation: Hardcopy (contents of display), active measurement reading, test report or thickness report, via the
• RS-232 interface to computer
• Interface:RS-232 C (bidirectional) or USB for PC computer.
• Analog output:Proportional voltage for amplitude and sound path of the echo in the gate; TTL signal for gate alarm
• Probe connector:Two LEMO1 equivalent compatible connectors
• Power supply:Removable 8800mAh/7.2V Li-ion Battery or mains supply via an external mains power/charger unit JBD15-A2S
• Operational period: 6-8nbsp;hours with Battery ( select LCD low bright )
• Battery charge indication: On the display
• Display size:Screen: 112mmx98mm (LxW)
• Dimensions: 238mmx158mmx52mm (LxWxD)
• Weight:1.75Kg for Tru-Sonic

 

Read less...

To contact Australian NDT Sales about Digital Ultrasonic Flaw Detector | Tru-Sonic use Get a quote.