Fire Resistant Cladding | ULTRACORE for sale from Blue Chip Group

Fire Resistant Cladding | ULTRACORE

Supplier: Blue Chip Group

Fire Resistant Cladding | ULTRACORE

ULTRACORE manufactured by BLUECHIP is a Deemed-to-Satisfy (DtS) non-combustible aluminium panel when tested to AS 1530.1 and AS 1530.3 as per the requirements of the NCC 2019, Clause C1.9(e)(vii).

11 Recent Views In Stock

Non-Combustible Aluminium Core Panel
ULTRACORE manufactured by BLUECHIP is a Deemed-to-Satisfy (DtS) non-combustible aluminium panel when tested to AS 1530.1 and AS 1530.3 as per the requirements of the NCC 2019, Clause C1.9(e)(vii). It has also been tested by Exova Warringtonfire to BS 8414 and AS 5113 full-scale testing to prove it does not contribute to the spread fire. Visually, ULTRACORE aluminium core panel looks the same as traditional aluminium composite panel but with zero combustible core content (0%) meaning it achieves the lowest risk rating, category D, from the Insurance Council of Australia.

Proven V-Groove Durability
Unlike SOLID aluminium panels, ULTRACORE can demonstrate 40 years of proven corner durability when using the common v-groove folding system. This is because the front skin is not impacted when v-grooving.

AS 1530.1 Non-Combustible
ULTRACORE is one of the few aluminium panels globally that is Deemed-to-Satisfy non-combustible when tested to AS 1530.1 and AS 1530.3 in accordance with the NCC 2019 Clause C1.9(e)(vii) requirements.

AS 5113 Fire Testing
ULTRACORE is Deemed-to-Satisfy non-combustible so does not require further testing however it has been tested to AS 5113 full-scale testing by Exova Warrintonfire to prove it does not contibute to the spread of fire.

Zero Polyethylene (0%)
Unlike most other aluminium panel products including FR, Plus, A2 and NC type panels, the ULTRACORE aluminium core panel contains ZERO percent flammable polyethylene (0%) and each lamina is 100% non-combustible.

Less Thermal Conductivity
ULTRACORE aluminium core panel has thermal conductivity of 2.54 W/mK compared to 205 W/mk for SOLID aluminium panel. This means 80 x less heat transfer into the building for greater fire safety and section J compliance.

Faster Fabrication Time
Compared to SOLID aluminium panel, ULTRACORE panel is much more cost-effective, faster and easier to fabricate on CNC machines using the well-proven z-angle cassette system with concealed mechanical fixings.

Oil-Canning Resistance
Oil-canning is the uneven distribution of tension in SOLID aluminium panels which results in a rippling effect on the facade. The superior mechanical properties of ULTRACORE guarantees against oil-canning.

Less Carbon Footprint
ULTRACORE aluminium core panel uses approximately 50% less aluminium per m2 than SOLID aluminium panels for much less carbon footprint and it is 50% lighter for signifigant structural and labour savings.

Product Range

ULTRACORE
Metallic Colours ULTRACORE
Solid / Matt Colours ULTRACORE
Sparkling Colours ULTRACORE
Chromatic Colours ULTRACORE
Imitation Finishes

Availability

Description

Sheet Sizes

Lead Time

MOQ

ULTRACORE Metallic Stock Colours UC9701, UC9205,

UC9134, UC9137, UC9308, UC4150, UC9809, UC5292

2500, 3200, 4000 x 1500mm

Stock

1 Sheet

ULTRACORE Solid Stock Colours UC1005, UC1025,

UC9902, UC1255, UC1270, UC9130, UC1590, UC1460,

UC1677, UC1190, UC1140
2500, 3200, 4000 x 1500mm Stock 1 Sheet

ULTRACORE Non-stock, BCG & Custom Colours

2500, 3200, 4000 x 1250mm

2500, 3200, 4000 x 1500mm

8-10 Weeks

300m2

ULTRACORE Matt, Sparkling & Chromatic Colours

2500, 3200, 4000 x 1250mm

2500, 3200, 4000 x 1500mm

8-10 Weeks

300m2

ULTRACORE Imitation Finishes

2500, 3200, 4000 x 1250mm

2500, 3200, 4000 x 1500mm

8-10 Weeks

300m2

Read more...

To contact Blue Chip Group about Fire Resistant Cladding | ULTRACORE use Get a quote.

Non-Combustible Aluminium Core Panel
ULTRACORE manufactured by BLUECHIP is a Deemed-to-Satisfy (DtS) non-combustible aluminium panel when tested to AS 1530.1 and AS 1530.3 as per the requirements of the NCC 2019, Clause C1.9(e)(vii). It has also been tested by Exova Warringtonfire to BS 8414 and AS 5113 full-scale testing to prove it does not contribute to the spread fire. Visually, ULTRACORE aluminium core panel looks the same as traditional aluminium composite panel but with zero combustible core content (0%) meaning it achieves the lowest risk rating, category D, from the Insurance Council of Australia.

Proven V-Groove Durability
Unlike SOLID aluminium panels, ULTRACORE can demonstrate 40 years of proven corner durability when using the common v-groove folding system. This is because the front skin is not impacted when v-grooving.

AS 1530.1 Non-Combustible
ULTRACORE is one of the few aluminium panels globally that is Deemed-to-Satisfy non-combustible when tested to AS 1530.1 and AS 1530.3 in accordance with the NCC 2019 Clause C1.9(e)(vii) requirements.

AS 5113 Fire Testing
ULTRACORE is Deemed-to-Satisfy non-combustible so does not require further testing however it has been tested to AS 5113 full-scale testing by Exova Warrintonfire to prove it does not contibute to the spread of fire.

Zero Polyethylene (0%)
Unlike most other aluminium panel products including FR, Plus, A2 and NC type panels, the ULTRACORE aluminium core panel contains ZERO percent flammable polyethylene (0%) and each lamina is 100% non-combustible.

Less Thermal Conductivity
ULTRACORE aluminium core panel has thermal conductivity of 2.54 W/mK compared to 205 W/mk for SOLID aluminium panel. This means 80 x less heat transfer into the building for greater fire safety and section J compliance.

Faster Fabrication Time
Compared to SOLID aluminium panel, ULTRACORE panel is much more cost-effective, faster and easier to fabricate on CNC machines using the well-proven z-angle cassette system with concealed mechanical fixings.

Oil-Canning Resistance
Oil-canning is the uneven distribution of tension in SOLID aluminium panels which results in a rippling effect on the facade. The superior mechanical properties of ULTRACORE guarantees against oil-canning.

Less Carbon Footprint
ULTRACORE aluminium core panel uses approximately 50% less aluminium per m2 than SOLID aluminium panels for much less carbon footprint and it is 50% lighter for signifigant structural and labour savings.

Product Range

ULTRACORE
Metallic Colours ULTRACORE
Solid / Matt Colours ULTRACORE
Sparkling Colours ULTRACORE
Chromatic Colours ULTRACORE
Imitation Finishes

Availability

Description

Sheet Sizes

Lead Time

MOQ

ULTRACORE Metallic Stock Colours UC9701, UC9205,

UC9134, UC9137, UC9308, UC4150, UC9809, UC5292

2500, 3200, 4000 x 1500mm

Stock

1 Sheet

ULTRACORE Solid Stock Colours UC1005, UC1025,

UC9902, UC1255, UC1270, UC9130, UC1590, UC1460,

UC1677, UC1190, UC1140
2500, 3200, 4000 x 1500mm Stock 1 Sheet

ULTRACORE Non-stock, BCG & Custom Colours

2500, 3200, 4000 x 1250mm

2500, 3200, 4000 x 1500mm

8-10 Weeks

300m2

ULTRACORE Matt, Sparkling & Chromatic Colours

2500, 3200, 4000 x 1250mm

2500, 3200, 4000 x 1500mm

8-10 Weeks

300m2

ULTRACORE Imitation Finishes

2500, 3200, 4000 x 1250mm

2500, 3200, 4000 x 1500mm

8-10 Weeks

300m2

Read less...

To contact Blue Chip Group about Fire Resistant Cladding | ULTRACORE use Get a quote.