Gasman CO2 Gas Monitoring and Detection Device

Supplier: Cebeco

The Gasman CO2 Carbon Dioxide Detector has intelligent sensors and self-checking functionality.

53 Recent Views In Stock

Features:

Weight: 130g
Dimensions: 90x48x24mm (3.5x1.9x0.95inch) HxWxD
Range and Alarms: Range 0-5.00% v/v , Alarm 1 0.50% v/v, Alarm 2 1.50% v/v
Typical response times: 30 seconds
Audible Alarms: Multiple alarm sounds allow selection of distinctive tones for different alarm levels.
Visible Alarms Dual colour: red/blue flashing LEDs in gas hazard
Vibrating Alarm: Internal vibrating alarm
Display: Custom LCD with backlight, with display of gas concentration. Graphic symbols for battery (with proportional indication of remaining operation time), and display mode. Start up indication when calibration is due within 30 days, calibration overdue, or service required.
Display Mode Level: Normal display for real time gas concentration levels. Display recall for Peak readings and TWA.
Datalogging: Full timed datalogging with adjustable sample rate, set to 1 minute data rate. 900 hours storage at 1 minute interval. >4800 capacity event logging to record all instrument events including: Switch on/off, Battery status, Alarms activate/clear including peak values of response, Gas Test pass or fail. All events are time stamped
Battery Type: Rechargeable Li-ion battery
Operating Time >24 hours.

Benefits:

Applications:

For more information or a quote please call or email for a direct reply.

To contact Cebeco about Gasman CO2 Gas Monitoring and Detection Device use Get a quote.

Features:

Weight: 130g
Dimensions: 90x48x24mm (3.5x1.9x0.95inch) HxWxD
Range and Alarms: Range 0-5.00% v/v , Alarm 1 0.50% v/v, Alarm 2 1.50% v/v
Typical response times: 30 seconds
Audible Alarms: Multiple alarm sounds allow selection of distinctive tones for different alarm levels.
Visible Alarms Dual colour: red/blue flashing LEDs in gas hazard
Vibrating Alarm: Internal vibrating alarm
Display: Custom LCD with backlight, with display of gas concentration. Graphic symbols for battery (with proportional indication of remaining operation time), and display mode. Start up indication when calibration is due within 30 days, calibration overdue, or service required.
Display Mode Level: Normal display for real time gas concentration levels. Display recall for Peak readings and TWA.
Datalogging: Full timed datalogging with adjustable sample rate, set to 1 minute data rate. 900 hours storage at 1 minute interval. >4800 capacity event logging to record all instrument events including: Switch on/off, Battery status, Alarms activate/clear including peak values of response, Gas Test pass or fail. All events are time stamped
Battery Type: Rechargeable Li-ion battery
Operating Time >24 hours.