GCC Laser Non-Metal Cutter and Engraver ...
X252RX | ||
Laser Source | 80W / 100W | |
Sealed CO2 Laser | ||
Laser Cooling | Water Cooled | |
Working Area | 25 in. x18 in. (635 x 458 mm) | |
Max. Part Size (W x L x H) |
All doors closed | 27 x 19 x 6.5 in. (685 x 482 x 165 mm) |
All doors open | 27 x ∞ x 6.5 in. (685 x ∞ x 165 mm) | |
Table Size | 31.1 x 20.9 in. (790 x 530 mm) | |
Dimensions (W x L x H) | 64.9 x 36.6 x 40.9 in. (1650 x 930 x 1040mm) | |
Driving Motor | Closed-loop DC servo control | |
Maximum Motor Speed | 40 IPS | |
Speed Control | Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job) | |
Power Control | Adjustable from 0~100% (Up to 16 color-linked power settings per job) | |
Engraving capability | 256-level gray scale image processing capability | |
Distance Accuracy | 0.254 mm or 0.1% of move, whichever is greater | |
Resolution (DPI) | Available 125, 250, 500, 1000 | |
Z-Axis Movement | Automatic | |
Focus Lens | Standard 2.0″, Optional 1.5″, 3″ | |
Computer Interface | 10 Base-T Ethernet, Full speed 2.0 USB | |
Memory Buffer | 32MB standard | |
Compatible Operating Systems | MS Windows | |
Safety | Class I Laser Product Compliant with EN60825 Class II Laser Product Compliant with CDRH 2006/42/EC Machinery Directive Compliance |
|
Facility Requirements | ||
Operation Voltage | 200-240VAC, 50/60Hz Auto Switching, MAX. 8A. | |
Water Chiller | External water chiller required |
Fume Extraction System | External exhaust system with minimum flow rate 640m3/h is required, 4-inch connection port on the back of machine. |
*Speed is not equal to throughput.
Specifications are subject to change without prior notice.
*The flow rate is determined by a default fume extraction system; the flow rate may vary due to a different fume extraction system.?
To contact Uscribe Laser Systems about GCC Laser Non-Metal Cutter and Engraver | Laserpro X252RX use Get a quote.
X252RX | ||
Laser Source | 80W / 100W | |
Sealed CO2 Laser | ||
Laser Cooling | Water Cooled | |
Working Area | 25 in. x18 in. (635 x 458 mm) | |
Max. Part Size (W x L x H) |
All doors closed | 27 x 19 x 6.5 in. (685 x 482 x 165 mm) |
All doors open | 27 x ∞ x 6.5 in. (685 x ∞ x 165 mm) | |
Table Size | 31.1 x 20.9 in. (790 x 530 mm) | |
Dimensions (W x L x H) | 64.9 x 36.6 x 40.9 in. (1650 x 930 x 1040mm) | |
Driving Motor | Closed-loop DC servo control | |
Maximum Motor Speed | 40 IPS | |
Speed Control | Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job) | |
Power Control | Adjustable from 0~100% (Up to 16 color-linked power settings per job) | |
Engraving capability | 256-level gray scale image processing capability | |
Distance Accuracy | 0.254 mm or 0.1% of move, whichever is greater | |
Resolution (DPI) | Available 125, 250, 500, 1000 | |
Z-Axis Movement | Automatic | |
Focus Lens | Standard 2.0″, Optional 1.5″, 3″ | |
Computer Interface | 10 Base-T Ethernet, Full speed 2.0 USB | |
Memory Buffer | 32MB standard | |
Compatible Operating Systems | MS Windows | |
Safety | Class I Laser Product Compliant with EN60825 Class II Laser Product Compliant with CDRH 2006/42/EC Machinery Directive Compliance |
|
Facility Requirements | ||
Operation Voltage | 200-240VAC, 50/60Hz Auto Switching, MAX. 8A. | |
Water Chiller | External water chiller required |
Fume Extraction System | External exhaust system with minimum flow rate 640m3/h is required, 4-inch connection port on the back of machine. |
*Speed is not equal to throughput.
Specifications are subject to change without prior notice.
*The flow rate is determined by a default fume extraction system; the flow rate may vary due to a different fume extraction system.?
To contact Uscribe Laser Systems about GCC Laser Non-Metal Cutter and Engraver | Laserpro X252RX use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product