Gunnebo - Safety Barrier | EX750 CAT2 Boom Gate

Supplier: Gunnebo Australia

Safety Barrier | EX750 CAT2 Boom Gate

EX750 Rising Arm Barriers are an ATEX / IECEx certified product that have been designed for vehicle control in hazardous areas which are potentially susceptible to explosive atmospheres.

11 Recent Views In Stock

Features of this product

Specifications of this product

Physical Dimensions: Barrier Cabinet – 1130mm H x 500mm W x 305mm D
Basic Power Requirements: 230v, 1ph, 6amp, 50HZ (Other voltages are available on request)
Control Voltage: S.E.L.V 24v
ATEX certified protection level: II 2G IIB c T3
IECEx certified protection level: Ex h IIB T3 Gb
Speed of operation: 4.2 seconds to raise/lower cycle
Approx weight: 130kg
Paint finish: INVER S.P.A. 40496 NP ESD Rosso 3001 (red), thickness 80 microns (anti-static paint)
Boom profile – Rectangular extruded aluminium 76 x 38mm white powder coated with red fascal striping (black and yellow option available) Max length 5m. Booms are mounted on the right hand (as standard unless specified)
Barrier arm: The barrier arm is constructed from 76 x 38mm aluminium, white powder coated with reflective red striping. Booms are mounted on the right side of the barrier as viewed from the back of the cabinet.
Power fail operation: Manual hand wind
IP & Electrical protection level: The barrier comes with an IP66, ATEX / IECEx Ex d explosion proof certified enclosure to enclose the control system

To contact Gunnebo Australia about Gunnebo Safety Barrier | EX750 CAT2 Boom Gate use Get a quote.

Features of this product

Specifications of this product

Physical Dimensions: Barrier Cabinet – 1130mm H x 500mm W x 305mm D
Basic Power Requirements: 230v, 1ph, 6amp, 50HZ (Other voltages are available on request)
Control Voltage: S.E.L.V 24v
ATEX certified protection level: II 2G IIB c T3
IECEx certified protection level: Ex h IIB T3 Gb
Speed of operation: 4.2 seconds to raise/lower cycle
Approx weight: 130kg
Paint finish: INVER S.P.A. 40496 NP ESD Rosso 3001 (red), thickness 80 microns (anti-static paint)
Boom profile – Rectangular extruded aluminium 76 x 38mm white powder coated with red fascal striping (black and yellow option available) Max length 5m. Booms are mounted on the right hand (as standard unless specified)
Barrier arm: The barrier arm is constructed from 76 x 38mm aluminium, white powder coated with reflective red striping. Booms are mounted on the right side of the barrier as viewed from the back of the cabinet.
Power fail operation: Manual hand wind
IP & Electrical protection level: The barrier comes with an IP66, ATEX / IECEx Ex d explosion proof certified enclosure to enclose the control system