Model F1, F3 and F4 have been re-engineered for industrial environments and switchboards based on our proven standard technology implementations.
Available in single phase, bi-phase, three phase as 1, 2, 3 & 4-pole from 16 to 250 Amperes and all All region-specific voltages and frequencies
Fully solid state, Natural Air Cooled suitable for ambient upto 55oC (no fans, lower noise, higher reliability)
IP rating of IP54 or IP55, or IP56, or IP65 (Protection against harmful deposits of dust, Water protected against the enclosure from any direction)
Small compact design implementation, Hot socket filed replaceable power module stainless steel enclosure (as an option)
Includes single operation maintenance bypass switch, and inlet/ outlet isolation in a segregated power distribution enclosure (improves maintainability, Maintenance Bypass pad-lockable)
Local bi-colour IP suitable LED mimic and Decal control panel with load indicator
Remote HLI monitoring & local interrogation TCP port (http, Modbus, SNMP, Email Alert, NTP), Remote monitoring contact(s), Visual and sound alarms, secure operation with front panel controls lock-out.
Inbuilt transient protection/ suppression (made for industrial environments)
Suitable for installations with fault capacities up to 20kA
Generous and extended margins to provide greater overload capability
Safe asynchronous source transfers
Very high MTBF (Mean Time between Failures >800,000 hours), 10 minute MTTR (Mean Time to Repair)and low, long MTTF: (Mean time to failure) and low PM maintenance requirement.
Back feed protection contactors (manufactured to and Complies with IEC/AS/NZ 62310-1,2,3)
Manual and automatic transfers selection, Preferred source selection with optional front panel controls lock-out.