KoEx Cooking Extruder | KL-130
A large number of product shapes and sizes are available using existing KoEx dies or those built to customer requirements.
The KoEx Cooking Extruder consists of the following functional parts:
Product Delivery System
This consists of a self-contained feeder mounted on the extruder. It has its own hopper and feeds directly to the barrel inlet or the optional Preconditioner. The operator can adjust the feed rate from the Machine Control System.
Preconditioner
A Preconditioner is provided in some applications where grain pre-treatment is required, such as precooking with steam, hydration, addition and blending of additives, to produce the required end product.
Extruder Barrel Auger Assembly
Product metered from the grain feeder [ or via the Preconditioner], is gravity fed into the auger system. The Auger will mix and shear the product inside the Barrel and then force it through specially shaped Die to achieve the desired result.
The Die Assembly is held in place by a heavy-duty quick release clamping system, enabling assembly or disassembly to be accomplished within seconds, greatly reducing machine downtime.
The Auger is made in sections allowing a configuration to be assembled which will give the desired action on the product.
Optional Electric heating can be provided to raise the auger system temperature to the required operating level.
Cooling can also be provided by passing water through special passages in the barrel. Once production has commenced, the temperature controls automatically heat or cool the system to maintain the desired product process conditions.
Water or Steam injection can also be provided if required.
Die Face Knife System
As the product is extruded from the die, it is cut to length by a rotating knife. This is driven by an independent variable speed electric motor, the speed of which controls the length of the product. The knife assembly is enclosed in a stainless steel guard for safety and cleanliness and directs the product downwards for collection. To provide quick and easy access to the die, the knife, complete with its guard assembly can be moved out of the way after releasing the clamping levers.
Main Drive System
A variable speed 75kW electric motor drives the auger system through a robust belt system. The main shaft bearings are grease lubricated for long life and minimum maintenance. For safety the belt drive is totally enclosed in an integral lockable cabinet.
Frame
The machine frame is constructed of heavy steel sections rigidly welded as a unit. Stainless steel covers provide protection for safety and cleanliness. The frame is mounted on adjustable feet, which may be bolted to a base or floor.
Control Equipment
The Machine Control System, gives the operator control and indication of the following functions:
The use of sophisticated and flexible control equipment in the form of a PLC with LCD HMI Screen, allows us to offer functions which previously could only be achieved with great difficulty.
Many additional features can be provided, from simple trend displays to keep track of production rates and maintenance schedules, to on-line management reporting on a computer screen in the supervisor’s office.
Safety Features
To protect the operators from accidental injury, all moving parts are housed behind interlocked and or lockable guards. The knife guards, are interlocked with their respective motors. Interlocks are also provided to sequence drives and thereby reduce the risk of accidental damage to the extruder.
To enable the continuous development of our products, we reserve the right to change our Machine Designs without notice.
To contact Koex about KoEx Cooking Extruder | KL-130 use Get a quote.
A large number of product shapes and sizes are available using existing KoEx dies or those built to customer requirements.
The KoEx Cooking Extruder consists of the following functional parts:
Product Delivery System
This consists of a self-contained feeder mounted on the extruder. It has its own hopper and feeds directly to the barrel inlet or the optional Preconditioner. The operator can adjust the feed rate from the Machine Control System.
Preconditioner
A Preconditioner is provided in some applications where grain pre-treatment is required, such as precooking with steam, hydration, addition and blending of additives, to produce the required end product.
Extruder Barrel Auger Assembly
Product metered from the grain feeder [ or via the Preconditioner], is gravity fed into the auger system. The Auger will mix and shear the product inside the Barrel and then force it through specially shaped Die to achieve the desired result.
The Die Assembly is held in place by a heavy-duty quick release clamping system, enabling assembly or disassembly to be accomplished within seconds, greatly reducing machine downtime.
The Auger is made in sections allowing a configuration to be assembled which will give the desired action on the product.
Optional Electric heating can be provided to raise the auger system temperature to the required operating level.
Cooling can also be provided by passing water through special passages in the barrel. Once production has commenced, the temperature controls automatically heat or cool the system to maintain the desired product process conditions.
Water or Steam injection can also be provided if required.
Die Face Knife System
As the product is extruded from the die, it is cut to length by a rotating knife. This is driven by an independent variable speed electric motor, the speed of which controls the length of the product. The knife assembly is enclosed in a stainless steel guard for safety and cleanliness and directs the product downwards for collection. To provide quick and easy access to the die, the knife, complete with its guard assembly can be moved out of the way after releasing the clamping levers.
Main Drive System
A variable speed 75kW electric motor drives the auger system through a robust belt system. The main shaft bearings are grease lubricated for long life and minimum maintenance. For safety the belt drive is totally enclosed in an integral lockable cabinet.
Frame
The machine frame is constructed of heavy steel sections rigidly welded as a unit. Stainless steel covers provide protection for safety and cleanliness. The frame is mounted on adjustable feet, which may be bolted to a base or floor.
Control Equipment
The Machine Control System, gives the operator control and indication of the following functions:
The use of sophisticated and flexible control equipment in the form of a PLC with LCD HMI Screen, allows us to offer functions which previously could only be achieved with great difficulty.
Many additional features can be provided, from simple trend displays to keep track of production rates and maintenance schedules, to on-line management reporting on a computer screen in the supervisor’s office.
Safety Features
To protect the operators from accidental injury, all moving parts are housed behind interlocked and or lockable guards. The knife guards, are interlocked with their respective motors. Interlocks are also provided to sequence drives and thereby reduce the risk of accidental damage to the extruder.
To enable the continuous development of our products, we reserve the right to change our Machine Designs without notice.
To contact Koex about KoEx Cooking Extruder | KL-130 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product