Lightpaths Optical Fibre Ducting System Get latest price

Read more...

To contact Warren & Brown Technologies about Lightpaths Optical Fibre Ducting System use Get a quote.

It is a simple to assemble, flexible system that provides protection from mechanical damage due to external causes. It also provides stress relief for optical fibre, by ensuring that a minimum 30 mm bending radius is maintained at all times.

There are often existing Optical Fibre installations of varying standard s; which can be unsatisfactory for the following reasons:

• They cause excessive bending,
• They have no stress relief,
• They are too expensive to maintain,
• They are difficult to install or,
• They do not allow for easy expansion.

Lightpaths ducting is available in six standard sizes. i.e. 300mm, 220 mm, 100mm, 100 x 50mm, 50mm and 30mm wide; which can be interconnected by standard adapto rs. There are many components available in each of these size ranges. Such as: straight duct, tee pieces, elbows, reducing adaptors etc.

All individual components have lids to ensure complete cable protection. The system allows fibre routing at custom points in duct lengths, via a cut and joint tech nique, or a simple notching system that provides a standard entry or exit point for drop off components.

These include right angle bends and flexible tubes; which enable protected access to multiple optic fibre transmission systems within a rack. Horizontal fibre systems are usually constructed with 300mm, 220mm and 1 00mm duct. Where limited overhead height exists for installing duct systems, then 1 00mm x 50mm duct can be used.

Vertical feeds, such as drop-offs, to equipment racks are g enerally made up with 50 and 30mm duct sections.

More information >>

Read less...

To contact Warren & Brown Technologies about Lightpaths Optical Fibre Ducting System use Get a quote.