Lincoln Electric Arc MIG Welding Equipment ...

Lincoln Electric - Arc MIG Welding Equipment | Idealarc DC-1000

Arc MIG Welding Equipment | Idealarc DC-1000

If your application requires pure welding power combined with multi-process flexibility, then the DC-1000, with 1300 amps of smooth DC output, is your best investment.

In Stock

Designed for semiautomatic and automatic welding, the precise control of the DC-1000 delivers superior high amperage MIG, flux-cored, submerged arc welding and air carbon arc gouging with up to 5/8" (15.9 mm) diameter carbons.

Processes:

MIG, Flux-Cored, Submerged Arc, Gouging

Advantages:

500 amp output connections provide enhanced arc characteristics for
low amperage submerged arc and MIG welding procedures.
Single range control for precise output control and easy operation.
Standard analog ammeter and analog voltmeter.
Use the mode switch to select the desired output characteristics for the process being used–CV Submerged Arc, CV Innershield®, CC Submerged Arc.
Power start/stop push button (NVR) switches with pilot light
Fuse protected 115V wire feeder auxiliary power with 1000 volt-amp capacity.
Terminal strip and output studs for remote connections and cable.
Low profile case allows installation of the DC-1000 under a workbench and for stacking up to 2 machines to conserve floor space.
Removable side panels for easy access to internal parts.
Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%.
Electronic and thermostatic protection from current overload and excessive temperatures.
Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion.
Recessed front panel protects operating controls.
Three-year warranty on parts and labor.
Seven-year warranty on the power rectifier.
Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

To contact The Lincoln Electric Company about Lincoln Electric Arc MIG Welding Equipment | Idealarc DC-1000 use Get a quote.

Processes:

MIG, Flux-Cored, Submerged Arc, Gouging

Advantages:

500 amp output connections provide enhanced arc characteristics for
low amperage submerged arc and MIG welding procedures.
Single range control for precise output control and easy operation.
Standard analog ammeter and analog voltmeter.
Use the mode switch to select the desired output characteristics for the process being used–CV Submerged Arc, CV Innershield®, CC Submerged Arc.
Power start/stop push button (NVR) switches with pilot light
Fuse protected 115V wire feeder auxiliary power with 1000 volt-amp capacity.
Terminal strip and output studs for remote connections and cable.
Low profile case allows installation of the DC-1000 under a workbench and for stacking up to 2 machines to conserve floor space.
Removable side panels for easy access to internal parts.
Line voltage compensation maintains weld consistency, even with line voltage changes of ±10%.
Electronic and thermostatic protection from current overload and excessive temperatures.
Internal components, including windings, rectifiers and circuit boards, are coated to protect against the effects of moisture and corrosion.
Recessed front panel protects operating controls.
Three-year warranty on parts and labor.
Seven-year warranty on the power rectifier.
Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.

Read less...

To contact The Lincoln Electric Company about Lincoln Electric Arc MIG Welding Equipment | Idealarc DC-1000 use Get a quote.

Idealarc DC-1000(0.21MB)

Let The Lincoln Electric Company provide you with a quote

Supplier

Get a quote

Supplier: The Lincoln Electric Company

Distribution: Australia, New Zealand, PNG, Pacific Islands

Location: Padstow, NSW

Customers: Bechtel, Mcconnell Dowell, Westconnex Construction

Trade With Confidence. The supplier of this item is approved as a Verified Supplier. Business registration, contact details and locations have been verified. The Lincoln Electric Company are also proudly displaying these credentials:

Established:

1895

Employees:

51-200

Customers:

Bechtel, Mcconnell Dowell, Westconnex Construction

Memberships:

WTIA, APGA, ASSDA

Certifications:

ISO 9001, ISO 14001

Distribution:

Australia, New Zealand, PNG, Pacific Islands