Linddana Wood Chipper | TP 175
Suitability
TP 175 MOBILE is a trailer-based twin disc wood chipper with a 4 cylinder 35cv diesel engine and suitable for branches up to 175 mm in diameter.
Features
Usability
With an integrated hydraulic system and 2 aggressive feed rollers a strong and problem-free feeding is ensured. Chipping proves efficient based on a fuel consumption level considerably lower than comparable machines in the market.
Technical Data | |
Max Wood Diameter | 175mm |
Max Opening | H x W = 175 x 191 mm |
Operation | Return/forward/stop of feed rollers through yellow operating bar |
Chipper Principle | Twin disc with TP OPTICUT |
Cutting Angle | 90 degrees |
Hopper Placement | Parallel to driving direction |
In Feed | 2 Hydraulic feed rollers. Spring compressed of 1 spring 8mm |
Feed Rollers | Horizontal |
Rotor disc – Diameter | 600mm |
Rotor disc – Weight in kg | 69kg |
Disc Rpm | 1625 rpm |
Number of Knives | 2 (12x110mm) |
Chip Length | 4-12mm |
Anvil/Counter Steel | 1 Horizontal and 1 Vertical |
Motor | Lombardini, 35 cv diesel, 4 cylinders, water cooled |
Transmission | TP STARTER Automaic coupling system |
Motor Stop Indicator in case of: | Too low oil pressure and too high temperature on cooling system |
No Stress Control | TP PILOT Including hour counter |
Fuel Consumption | 3.5 Litre/hour |
Tank Volume | 20 Litres |
Trailer | one axle trailer (140 km/h) with drawbar and breaks, galvanized |
Chip Capacity | 5-10 m³/hour |
Weight | < 750 kg |
To contact Chipstar Australia about Linddana Wood Chipper | TP 175 use Get a quote.
Suitability
TP 175 MOBILE is a trailer-based twin disc wood chipper with a 4 cylinder 35cv diesel engine and suitable for branches up to 175 mm in diameter.
Features
Usability
With an integrated hydraulic system and 2 aggressive feed rollers a strong and problem-free feeding is ensured. Chipping proves efficient based on a fuel consumption level considerably lower than comparable machines in the market.
Technical Data | |
Max Wood Diameter | 175mm |
Max Opening | H x W = 175 x 191 mm |
Operation | Return/forward/stop of feed rollers through yellow operating bar |
Chipper Principle | Twin disc with TP OPTICUT |
Cutting Angle | 90 degrees |
Hopper Placement | Parallel to driving direction |
In Feed | 2 Hydraulic feed rollers. Spring compressed of 1 spring 8mm |
Feed Rollers | Horizontal |
Rotor disc – Diameter | 600mm |
Rotor disc – Weight in kg | 69kg |
Disc Rpm | 1625 rpm |
Number of Knives | 2 (12x110mm) |
Chip Length | 4-12mm |
Anvil/Counter Steel | 1 Horizontal and 1 Vertical |
Motor | Lombardini, 35 cv diesel, 4 cylinders, water cooled |
Transmission | TP STARTER Automaic coupling system |
Motor Stop Indicator in case of: | Too low oil pressure and too high temperature on cooling system |
No Stress Control | TP PILOT Including hour counter |
Fuel Consumption | 3.5 Litre/hour |
Tank Volume | 20 Litres |
Trailer | one axle trailer (140 km/h) with drawbar and breaks, galvanized |
Chip Capacity | 5-10 m³/hour |
Weight | < 750 kg |
To contact Chipstar Australia about Linddana Wood Chipper | TP 175 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product