LPKF PCB Circuit Board Plotters | ProtoMat ...
The new LPKF ProtoMat S series is great for virtually any job in in-house prototyping. The ProtoMat S63 masters 2.5-dimensional material machining and features a faster spindle speed of 60.000 rpm. This also makes it suitable for drilling test adapters and housing production.
Automatic tool change
Up to 15 tools are automatically changed during production. This reduces set-up times and allows for unattended production.
Automatic milling width adjustment
The conical milling cutters produce different insulation channels depending on the penetration depth. The automatic milling width adjustment maintains uniform PCB track widths.
Dispensing
The built-in dispenser applies solder paste onto the substrates fully automatically with minimum data preparation.
60.000 rpm spindle motor
The 60.000 rpm milling spindle ensures the shortest machining times and highest accuracy.Upgradeable to ProtoMat S103 (100.000 rpm spindle and pneumatic non-contact working depth limiter and vacuum table. Start upgrade animation)
Options & accessories
Dust extraction
Compressor
Vacuum table
Status light
LPKF ProtoMat S63 | |
---|---|
Max. material size and layout area (X/Y/Z) | 229 mm x 305 mm x 35/22 mm (9” x 12” x 1.4/ 0.9”)* |
Resolution (X/Y) | 0.5 μm (0.02 mil) |
Repeatability | ± 0.001 mm (± 0.04 mil) |
Precision of front-to-back alignment | ± 0.02 mm (± 0.8 mil) |
Milling spindle | Max. 60,000 rpm, software controlled |
Tool change | Automatic, 15 positions |
Milling width adjustment | Automatic |
Tool holder | 3.175 mm (1/8”), automatic holder |
Drilling speed | 120 strokes/min |
Travel speed (X/Y) | Max. 150 mm/ s (6”/s) |
X/Y-drive | 3-phase stepper motor |
Z-drive | 2-phase stepper motor |
Dimensions (W x H x D) | 670 mm x 540 mm x 840 mm (26.4” x 21.3” x 33”) |
Weight | 58 kg (128 lbs) |
Operating conditions | |
Power supply | 90 – 240 V, 50 – 60 Hz, 450 W |
Compressed air supply (only for Dispensing) | 6 bar (87 psi), 10 l/min (0.35 cfm) |
Required accessories | Dust extraction |
For more information or a quote please call or use the IndustrySearch email enquiry form for a fast direct reply.
To contact Embedded Logic Solutions about LPKF PCB Circuit Board Plotters | ProtoMat S63 use Get a quote.
The new LPKF ProtoMat S series is great for virtually any job in in-house prototyping. The ProtoMat S63 masters 2.5-dimensional material machining and features a faster spindle speed of 60.000 rpm. This also makes it suitable for drilling test adapters and housing production.
Automatic tool change
Up to 15 tools are automatically changed during production. This reduces set-up times and allows for unattended production.
Automatic milling width adjustment
The conical milling cutters produce different insulation channels depending on the penetration depth. The automatic milling width adjustment maintains uniform PCB track widths.
Dispensing
The built-in dispenser applies solder paste onto the substrates fully automatically with minimum data preparation.
60.000 rpm spindle motor
The 60.000 rpm milling spindle ensures the shortest machining times and highest accuracy.Upgradeable to ProtoMat S103 (100.000 rpm spindle and pneumatic non-contact working depth limiter and vacuum table. Start upgrade animation)
Options & accessories
Dust extraction
Compressor
Vacuum table
Status light
LPKF ProtoMat S63 | |
---|---|
Max. material size and layout area (X/Y/Z) | 229 mm x 305 mm x 35/22 mm (9” x 12” x 1.4/ 0.9”)* |
Resolution (X/Y) | 0.5 μm (0.02 mil) |
Repeatability | ± 0.001 mm (± 0.04 mil) |
Precision of front-to-back alignment | ± 0.02 mm (± 0.8 mil) |
Milling spindle | Max. 60,000 rpm, software controlled |
Tool change | Automatic, 15 positions |
Milling width adjustment | Automatic |
Tool holder | 3.175 mm (1/8”), automatic holder |
Drilling speed | 120 strokes/min |
Travel speed (X/Y) | Max. 150 mm/ s (6”/s) |
X/Y-drive | 3-phase stepper motor |
Z-drive | 2-phase stepper motor |
Dimensions (W x H x D) | 670 mm x 540 mm x 840 mm (26.4” x 21.3” x 33”) |
Weight | 58 kg (128 lbs) |
Operating conditions | |
Power supply | 90 – 240 V, 50 – 60 Hz, 450 W |
Compressed air supply (only for Dispensing) | 6 bar (87 psi), 10 l/min (0.35 cfm) |
Required accessories | Dust extraction |
For more information or a quote please call or use the IndustrySearch email enquiry form for a fast direct reply.
To contact Embedded Logic Solutions about LPKF PCB Circuit Board Plotters | ProtoMat S63 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product