Mechanical Flange Face Tool | QuickFace ...
Refacing of smaller pipe flanges – up to 152.4mm, 6in inside diameter - can be a real problem where the job is in awkward or hazardous locations.
Sometimes such pipes can re located in high, confined or less accessible places in refineries and energy plants, mineral processing plants, waste water or industrial processing installations - or out in the field many kilometres away from the nearest power.
Sometimes also they are part of a larger pipe structure where they may get overlooked during maintenance programmes because they are too inconvenient to disassemble for the more elaborate refacing procedures to which larger pipes are subjected.
One solution to this safety, maintenance and potential leakage challenge is the QuickFace FF Series hand-powered Mechanical Flange Face Tool from Enerpac, which can turn what is usually a two-man refacing operation with powered tools, into a one-man job without the need for heavy equipment, air compressors or portable generators. The tool is suitable for a wide range of processing and pipeline-intensive industries. Features include:
Hand-operation which means the machine tool can be set up anywhere without the need for air, electric or hydraulic power support
Lightweight (33lb, 14.96kg boxed) tool is easily handled and easily transportable to remote locations for increased productivity
Its range of interchangeable collets, (from 1-6in, 25.4- 152.39mm) allows the user to work on many different flanges with minimal times between set-ups.
Adjustable cutting head is capable of facing flanges from 1-12in, 25.4-304.79mm, which gives the user greater flexibility.
"Now for the first time engineers can achieve the same high accuracy and performance of a powered machine tool in a versatile, lightweight and extremely portable format," Pat Molloy, Enerpac Bolting Manager says.
QuickFace FF-Series Mechanical Flange Face Tool is simple to operate. After selecting the correct lead screw for the operation, the tool body is inserted in the pipe end and centres itself with adjustable locators to provide truly concentric operation. The tool arm is then rotated by hand using a worm-gear mechanism to provide a perfect spiral "gramophone" finish around the flange. The tool can be adjusted with a calibrated slide to define cut depth and the correct finish.
QuickFace has a wide mounting range of 25.4 mm (1") – 157.5mm (6") ID and is capable of facing 25.4mm (1") – 304.8mm (12") OD flanges using standard 10mm (3/8in) cutting tools. In addition, the tool can be paired with different lead screws, making it suitable for resurfacing damaged raised-face or lens-ring joint flanges to high safety standards.
QuickFace offers cost-savings on third party equipment rental (not needing compressors or generators) as well as time-savings pre-setup. The cold work tool requires no hot work permits. One person can set up in minutes, with no need for cranes or rigging equipment.
Little operator training is required for safe, easy use. The operator is in full control of the operation throughout, with no power required, reducing combustion potential. While reducing capital costs, QuickFace offers the same accuracy, precision and quality of finished as powered machines.
To contact Enerpac about Mechanical Flange Face Tool | QuickFace FF use Get a quote.
Refacing of smaller pipe flanges – up to 152.4mm, 6in inside diameter - can be a real problem where the job is in awkward or hazardous locations.
Sometimes such pipes can re located in high, confined or less accessible places in refineries and energy plants, mineral processing plants, waste water or industrial processing installations - or out in the field many kilometres away from the nearest power.
Sometimes also they are part of a larger pipe structure where they may get overlooked during maintenance programmes because they are too inconvenient to disassemble for the more elaborate refacing procedures to which larger pipes are subjected.
One solution to this safety, maintenance and potential leakage challenge is the QuickFace FF Series hand-powered Mechanical Flange Face Tool from Enerpac, which can turn what is usually a two-man refacing operation with powered tools, into a one-man job without the need for heavy equipment, air compressors or portable generators. The tool is suitable for a wide range of processing and pipeline-intensive industries. Features include:
Hand-operation which means the machine tool can be set up anywhere without the need for air, electric or hydraulic power support
Lightweight (33lb, 14.96kg boxed) tool is easily handled and easily transportable to remote locations for increased productivity
Its range of interchangeable collets, (from 1-6in, 25.4- 152.39mm) allows the user to work on many different flanges with minimal times between set-ups.
Adjustable cutting head is capable of facing flanges from 1-12in, 25.4-304.79mm, which gives the user greater flexibility.
"Now for the first time engineers can achieve the same high accuracy and performance of a powered machine tool in a versatile, lightweight and extremely portable format," Pat Molloy, Enerpac Bolting Manager says.
QuickFace FF-Series Mechanical Flange Face Tool is simple to operate. After selecting the correct lead screw for the operation, the tool body is inserted in the pipe end and centres itself with adjustable locators to provide truly concentric operation. The tool arm is then rotated by hand using a worm-gear mechanism to provide a perfect spiral "gramophone" finish around the flange. The tool can be adjusted with a calibrated slide to define cut depth and the correct finish.
QuickFace has a wide mounting range of 25.4 mm (1") – 157.5mm (6") ID and is capable of facing 25.4mm (1") – 304.8mm (12") OD flanges using standard 10mm (3/8in) cutting tools. In addition, the tool can be paired with different lead screws, making it suitable for resurfacing damaged raised-face or lens-ring joint flanges to high safety standards.
QuickFace offers cost-savings on third party equipment rental (not needing compressors or generators) as well as time-savings pre-setup. The cold work tool requires no hot work permits. One person can set up in minutes, with no need for cranes or rigging equipment.
Little operator training is required for safe, easy use. The operator is in full control of the operation throughout, with no power required, reducing combustion potential. While reducing capital costs, QuickFace offers the same accuracy, precision and quality of finished as powered machines.
To contact Enerpac about Mechanical Flange Face Tool | QuickFace FF use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product