Newtronic Walk-In Stability Humidity Chamber ...

Newtronic - Walk-In Stability Humidity Chamber

Supplier: Biotec Solutions

Walk-In Stability Humidity Chamber

WALK-IN STABILITY (HUMIDITY) CHAMBERS WITH ECOTRONIC TECHNOLOGY

In Stock

These are medium to large-sized chambers that are custom-built to ensure that they not only fit optimally in your lab's stability area but also address your large-scale stability testing requirements.

Walk-In Chambers have now become a de-facto requirement for companies planning multiple ANDA filings & planning to launching various products simultaneously.

NEWTRONIC Walk-Ins ensure a smooth air-flow pattern to improve the temperature & humidity distribution across the chamber. This has also led to huge load reduction on the heating, cooling & humidifier systems. This & many other innovations in the construction & design aspects have ensured dramatic reduction in power consumption of our Walk-Ins.

NEWTRONIC has also been regularly exporting the Walk-In Chambers to all the major markets of the world. We ensure our products meet all kinds of country-specific requirements such as voltage specifications, regulatory needs, container shipping, etc

Features

Ethernet Communications
- High-speed data transfer
- Significantly faster than serial(RS-485) communication
- Global standard for communication protocol
- No need for a separate PC interface
- Data Operations from any PC over the LAN
Standby Humidity and Cooling System
- Completely ready-to-use systems
- Automatic switch-over upon failure of primary systems to achieve conditions
- Switch-over also upon detection of HP/LP & Internal fault
- Scheduled & manual change-overs
- Recording of all change-overs in the software
PLC-Based Control System
- Complete Operations driven through PLC
- No Data Loss: Data Storage of upto 1000 readings on the PLC itself
- At an interval of 30 mins, data upto 20 days is stored on the PLC itself
- Facility to send emails directly from the PLC
Touch Screen Display
- All operations through a single 4" Color touch screen display
- PLC IP Address setting
- Component Working Hours
- Standby system change over
- Password protection for set values and calibration mode
E-Mail Alert
- When an alarm is triggered, an e-mail is sent to the registered PC or mobile address
- *connection to a mail server is required to use e-mail alert.
Complete Range of Alarms
- Temperature & Humidity Deviations
- Door Opening
- Water Supply Failure
- Component Failure
- Mains Failure
Documentation and Training
- IQ, OQ, PQ
- Calibration certificates
- Operations & maintenance manuals
- GA & Electrical drawings
- Material test certificates
- Training to end-users
Safety
- Temperature Overshoot/Undershoot
- Humidity Overshoot
- Low water-level
- Delay Timer to safeguard the Compressor
- MCB to cut-off over-current supply
- Standby Controlling Sensor upon failure of Primary
- In Walk-in chambers door can be open from inside
- Emergency Bell switch inside the Chamber
ICDAS Software
- 21 CFR Part 11 Ready
- Single software suitable for up to 20 equipment
- Automatic daily data back-up
- Alarm logs. Alarm acknowledgement with e-signatures
- Audit trails
- MKT Calculations
- Graphical viewing & data trending
- Data export in pdf format
Touch Screen Door Access System
- Password based access control
- Restricts access to unauthorized persons
Alarm Transmission
- Mobile alert system
- Time of alarm transmission
- Name of equipment
- Transmitted message(Equipment name, alarm time,type of alarm & limits)

Specifications

Temperature Range	20°C to 60°C
Temperature Accuracy	± 0.5°C
Temperature Uniformity	± 1°C
Humidity Range	40% RH to 95% RH
Humidity Accuracy	± 2% RH
Humidity Uniformity	± 3% RH

Standard Equipment

Double walled with 80mm PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Stand by humidity system
Stainless Steel Trays	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Observation window - 300 x 300 mm	High speed Ethernet based communication
Illuminated working area	All operations through a single 4" Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature humidity sensor with 4-20mA output
Flooring of Linoleum carpet	Safety devices: Low & High temperature cut-off settable thermostats & high humidity cut-off device
Forced air circulation for uniform temperature	Audio/Visual alarms for deviations
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Complete with IQ, OQ, PQ & Operations & Maintenance Manual
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.

Optional Accessories

ICDAS - A Single Software installation for all Newtronic make equipments	Door Access system (Numeric or Biometertic)
8pt. Temperature & Humidity Scanners	Mobile Alert system
Stand by Cooling System with auto switch overs	Remote alarm system suitable for 4 nos. Newtronic make equipment

To contact Biotec Solutions about Newtronic Walk-In Stability Humidity Chamber use Get a quote.

Features

Ethernet Communications
- High-speed data transfer
- Significantly faster than serial(RS-485) communication
- Global standard for communication protocol
- No need for a separate PC interface
- Data Operations from any PC over the LAN
Standby Humidity and Cooling System
- Completely ready-to-use systems
- Automatic switch-over upon failure of primary systems to achieve conditions
- Switch-over also upon detection of HP/LP & Internal fault
- Scheduled & manual change-overs
- Recording of all change-overs in the software
PLC-Based Control System
- Complete Operations driven through PLC
- No Data Loss: Data Storage of upto 1000 readings on the PLC itself
- At an interval of 30 mins, data upto 20 days is stored on the PLC itself
- Facility to send emails directly from the PLC
Touch Screen Display
- All operations through a single 4" Color touch screen display
- PLC IP Address setting
- Component Working Hours
- Standby system change over
- Password protection for set values and calibration mode
E-Mail Alert
- When an alarm is triggered, an e-mail is sent to the registered PC or mobile address
- *connection to a mail server is required to use e-mail alert.
Complete Range of Alarms
- Temperature & Humidity Deviations
- Door Opening
- Water Supply Failure
- Component Failure
- Mains Failure
Documentation and Training
- IQ, OQ, PQ
- Calibration certificates
- Operations & maintenance manuals
- GA & Electrical drawings
- Material test certificates
- Training to end-users
Safety
- Temperature Overshoot/Undershoot
- Humidity Overshoot
- Low water-level
- Delay Timer to safeguard the Compressor
- MCB to cut-off over-current supply
- Standby Controlling Sensor upon failure of Primary
- In Walk-in chambers door can be open from inside
- Emergency Bell switch inside the Chamber
ICDAS Software
- 21 CFR Part 11 Ready
- Single software suitable for up to 20 equipment
- Automatic daily data back-up
- Alarm logs. Alarm acknowledgement with e-signatures
- Audit trails
- MKT Calculations
- Graphical viewing & data trending
- Data export in pdf format
Touch Screen Door Access System
- Password based access control
- Restricts access to unauthorized persons
Alarm Transmission
- Mobile alert system
- Time of alarm transmission
- Name of equipment
- Transmitted message(Equipment name, alarm time,type of alarm & limits)

Specifications

Temperature Range	20°C to 60°C
Temperature Accuracy	± 0.5°C
Temperature Uniformity	± 1°C
Humidity Range	40% RH to 95% RH
Humidity Accuracy	± 2% RH
Humidity Uniformity	± 3% RH

Standard Equipment

Double walled with 80mm PUF insulated modular panels with easy on-site assembly	System is made up of split type condenser unit in well-ventilated area to avoid throw of hot air in the room
SS 304 Interior & Exterior either SS 304 or Powder Coated G.I.	Stand by humidity system
Stainless Steel Trays	Complete Operations driven through PLC with data logging capacity of upto 1000 readings & email facility
Observation window - 300 x 300 mm	High speed Ethernet based communication
Illuminated working area	All operations through a single 4" Color Touch Screen
U-shaped SS tubular heaters	High-quality German Make temperature humidity sensor with 4-20mA output
Flooring of Linoleum carpet	Safety devices: Low & High temperature cut-off settable thermostats & high humidity cut-off device
Forced air circulation for uniform temperature	Audio/Visual alarms for deviations
Non Condensing steam injection type humidity system with standby heater & auto switch overs	Complete with IQ, OQ, PQ & Operations & Maintenance Manual
CFC free cooling system consisting of hermetically sealed compressor coupled with evaporation coil & condenser

Power supply: 230/415 volts 50 Hz main supply. Also available with 60 Hz Cycle.

Optional Accessories

ICDAS - A Single Software installation for all Newtronic make equipments	Door Access system (Numeric or Biometertic)
8pt. Temperature & Humidity Scanners	Mobile Alert system
Stand by Cooling System with auto switch overs	Remote alarm system suitable for 4 nos. Newtronic make equipment