OEM 3 Three Inch Bore Pumps | Submersible ...
3 Three Inch Bore Pump
Assembly includes 3 submersible pump, motor & starter box only.
This model has a 0.55kw/0.75hp 3-wire (4-core) single 1 phase motor.
As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor. However, it has the added feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump:
Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core:
Stainless Steel Support Cable
Stainless Steel Support Cable Grips/Clamps
Pressure Gauges
Installation Roller
Pumps used down old windmill bores
View the 3 Three Inch Bore Pump at Strongman Pumps
To contact Strongman Pumps about OEM 3 Three Inch Bore Pumps | Submersible Pumps use Get a quote.
3 Three Inch Bore Pump
Assembly includes 3 submersible pump, motor & starter box only.
This model has a 0.55kw/0.75hp 3-wire (4-core) single 1 phase motor.
As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor. However, it has the added feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below.
Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump:
Electrical Cable
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core:
Stainless Steel Support Cable
Stainless Steel Support Cable Grips/Clamps
Pressure Gauges
Installation Roller
Pumps used down old windmill bores
View the 3 Three Inch Bore Pump at Strongman Pumps
To contact Strongman Pumps about OEM 3 Three Inch Bore Pumps | Submersible Pumps use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product