Pack King - King Roto Wrap Self Levelling Table and Stretch Wrapper Combo Get latest price

Read more...

To contact Pack King about Pack King King Roto Wrap Self Levelling Table and Stretch Wrapper Combo use Get a quote.

The ROTO-WRAP STRETCH WRAPPER combines a ROTO-LIFT spring-assisted self-levelling table with a powered turntable. ROTO-WRAP is just like the standard turntable unit when the wrapper is disconnected, and the turntable still rotates (only one way).

The benefit of the ROTO-WRAP is that when the pallet has been loaded, you can stretch wrap the load without moving it. Simply push the wheeled wrapper until the two steel guides dock into the base of the main unit. Connect the plug and the lock mechanism and it is ready to wrap.

Plug the wrapper into a 110v supply. Pull out the film and attach to the load. Press the button for the turntable to start, then adjust the tension of the film via the knob on top of the film carriage, whilst raising the carriage and overlapping film or adding more layers as required.

The rotation speed can be adjusted on the control panel (rotation is set to most common speed of 9 rpm). An Emergency Stop Button is also fitted.

The standard height mast wraps loads up to 70.8″ (1800 mm) in height. An optional mast will wrap up to 82.6″ (2100 mm).

The film carriage accepts hand film rolls. The roll weight is neutralised by a counterweight inside the mast. The wrapper can be stopped in the top position to allow a top cover to be placed over the load, prior to continuing to wrap the cover to the load.

Of course, you can have as many ROTO-WRAP Powered Turntables as you like, and only one docking wrapper instead of investing in a separate stretch wrapper which takes up much more space, and of having to shift the load twice to finish the job. The on-demand stretch wrapper takes up very little space and can be wheeled away when not required.

Read less...

To contact Pack King about Pack King King Roto Wrap Self Levelling Table and Stretch Wrapper Combo use Get a quote.