Pipe Bends & Fittings - Elbow, Tee, Reducer, ...
The pipe bend product is manufactured according to SY/5257-2004, ISO15590-1standard and national or industrial standards in petroleum, natural gas, and chemical engineering etc. The pipe fitting products are manufactured according to GB/T13401, GB/T12459, MSS SP-75, ISO15590-1 and other standards, can also be processed according to additional technical requirements of the customers. The pipe fittings comprise tee joints, elbows, and pipe reducers etc.
Specifications
Product | Specs and parameters | |
---|---|---|
Pipe bends | Pipe bend diameter: DN 219- DN 1524mm | |
Bending radius: 3-10m | ||
Bending angle: ≤90o | ||
Wall thickness: Max.: 50mm | ||
Pipe fittings | Tee joints (straight tee joints and reduced tee joints) |
Tee joint diameter: DN 250- DN 1500mm Bending radius: 3-10mm Wall thickness: 10-120mm |
Elbows | Elbow diameter: DN 250- DN 1500mm Bending radius: 1.5D-3D Bending angle: 45° 90° 180° Wall thickness: 5.0-50mm |
|
Pipe cap | Pipe cap diameter: DN50- DN1500mm Wall thickness: 2.0-80mm |
|
Pipe reducers (concentric, eccentric) |
Pipe reducer diameter: DN20*15-DN1500*1400 Wall thickness: 5.0-80mm |
Application
Pipe bends and pipe fitting products can be used in load-bearing pipelines in such industries as petroleum, natural gas, chemical engineering, electricity, and metallurgy etc., they are the best choices for long-distance transportation pipelines.
Production Line
Integrated with the most advanced technology and automation engineering concept, the bends production line adopts medium frequency induction heating technique, which is the most progressive technical process for bends with large diameter and thick-wall. The products are of high quality, well-shaped appearance, accuracy bending radius and large scope of application. The annual production capacity is around 3000 pieces.
To contact IPA Asia Limited about Pipe Bends & Fittings - Elbow, Tee, Reducer, Cross use Get a quote.
The pipe bend product is manufactured according to SY/5257-2004, ISO15590-1standard and national or industrial standards in petroleum, natural gas, and chemical engineering etc. The pipe fitting products are manufactured according to GB/T13401, GB/T12459, MSS SP-75, ISO15590-1 and other standards, can also be processed according to additional technical requirements of the customers. The pipe fittings comprise tee joints, elbows, and pipe reducers etc.
Specifications
Product | Specs and parameters | |
---|---|---|
Pipe bends | Pipe bend diameter: DN 219- DN 1524mm | |
Bending radius: 3-10m | ||
Bending angle: ≤90o | ||
Wall thickness: Max.: 50mm | ||
Pipe fittings | Tee joints (straight tee joints and reduced tee joints) |
Tee joint diameter: DN 250- DN 1500mm Bending radius: 3-10mm Wall thickness: 10-120mm |
Elbows | Elbow diameter: DN 250- DN 1500mm Bending radius: 1.5D-3D Bending angle: 45° 90° 180° Wall thickness: 5.0-50mm |
|
Pipe cap | Pipe cap diameter: DN50- DN1500mm Wall thickness: 2.0-80mm |
|
Pipe reducers (concentric, eccentric) |
Pipe reducer diameter: DN20*15-DN1500*1400 Wall thickness: 5.0-80mm |
Application
Pipe bends and pipe fitting products can be used in load-bearing pipelines in such industries as petroleum, natural gas, chemical engineering, electricity, and metallurgy etc., they are the best choices for long-distance transportation pipelines.
Production Line
Integrated with the most advanced technology and automation engineering concept, the bends production line adopts medium frequency induction heating technique, which is the most progressive technical process for bends with large diameter and thick-wall. The products are of high quality, well-shaped appearance, accuracy bending radius and large scope of application. The annual production capacity is around 3000 pieces.
To contact IPA Asia Limited about Pipe Bends & Fittings - Elbow, Tee, Reducer, Cross use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product