Piranha Triple Rotor – Flex-Wing Slasher

Piranha - Triple Rotor – Flex-Wing Slasher

Supplier: Ben Wye

Triple Rotor – Flex-Wing Slasher

Piranha Triple Rotor – Flex-Wing Slasher’s

In Stock

Flexwing slashers are available in 3 standard widths and are designed for cutting wide areas, mounded orchards, road verges and just about anything else.

They have the versatility of folding up to transport width without leaving the tractor seat and the wings float independently up to 30 degrees and down to 15 degrees over uneven terrain to give a uniform cut.

Couple that together with a mechanical level lift system with fine adjustable hydraulic cylinder mounted on spring suspension, 150mm blade overlap with updraft blades and you have one of the most versatile and heavy duty Australian made rotary cutters on the market.

Standard models are the Flexwing 4500,5000 and the 5500.
Hydraulic wings fold up to 90 degrees for transport which are protected by an integral anti drop valve for ultimate safety.
All models fold up under 2400mm for road transport and for getting through gates.
Independent floating 3 piece deck floats up 30 degrees and down 15 degrees for undulating ground and a uniform cut.
Standard gearboxes are (@540rpm) 150hp three way divider driving 3 x 130hp rotor gearboxes.
All gearboxes shafts are 1 ¾ 20 spline for exceptional torque transmission.
Hydraulic over mechanical level lift trailing unit with heavy duty adjustable wing turn buckles.
Spring shock absorber on wheel cylinder provides smooth operation while reducing shock loads to the main frame.
Full length stainless steel hinge pins provide greater strength and durability.
The main bodies are three piece construction folded and fully reinforced HA 350 grade Australian made plate and tube.
Come standard with 10mm front and rear zinc plated chain curtain with wire rope replacement system.

To contact Ben Wye about Piranha Triple Rotor – Flex-Wing Slasher use Get a quote.

Flexwing slashers are available in 3 standard widths and are designed for cutting wide areas, mounded orchards, road verges and just about anything else.

Standard models are the Flexwing 4500,5000 and the 5500.
Hydraulic wings fold up to 90 degrees for transport which are protected by an integral anti drop valve for ultimate safety.
All models fold up under 2400mm for road transport and for getting through gates.
Independent floating 3 piece deck floats up 30 degrees and down 15 degrees for undulating ground and a uniform cut.
Standard gearboxes are (@540rpm) 150hp three way divider driving 3 x 130hp rotor gearboxes.
All gearboxes shafts are 1 ¾ 20 spline for exceptional torque transmission.
Hydraulic over mechanical level lift trailing unit with heavy duty adjustable wing turn buckles.
Spring shock absorber on wheel cylinder provides smooth operation while reducing shock loads to the main frame.
Full length stainless steel hinge pins provide greater strength and durability.
The main bodies are three piece construction folded and fully reinforced HA 350 grade Australian made plate and tube.
Come standard with 10mm front and rear zinc plated chain curtain with wire rope replacement system.