Single Phase True Power Controller | TE10P

TE10P from Invensys Eurotherm

The TE10P provides accurate power control for a wide range of industrial, single phase loads.

74 Recent Views Call for more details

By using either an analogue or digital set-point, the TE10P can be used for the precise control of power in loads that would otherwise prove difficult to accurately regulate.

Flexibility

The TE10P is configurable for different types of input, firing mode, feedback and load type. It is suitable for driving either simple resistive loads or complex loads such as Silicon Carbide, Platinum, Molybdenum or Short Wave Infrared lamps.

Dynamic load fault detection allows continuous monitoring of loads, including those with characteristics that are dependent on temperature or time.

The feedback type can be selected from; RMS Voltage, RMS Current, I2, V2, Transfer Between I2 and V2, transfer between I2 and Power, True Power or Open Loop.

Communications

Optional RS422 or RS485 communications with Modbus or Profibus protocol allow the TE10P to be configured or controlled from an external supervisory system.

Features

Current range from 16 to 80 amps, voltage range from 100 to 500 volts
Four digit display and single push button, simplify Operating, Commissioning, Maintenance and Configuration
Isolated Analogue retransmission of power
Configurable Alarm Relay

Click here for further product information

To contact Invensys Eurotherm about Single Phase True Power Controller | TE10P use Get a quote.