White International Pressure Pump Controllers ...
The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.
The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.
Features and Benefits
Construction Characteristic
Inlet | 1" BSP male |
Outlet | 1" BSP male |
Built in non-return valve | |
No flow/loss of prime protection | |
Manual start switch (RESET) | |
Voltage LED (GREEN power on light) | |
Pump working LED (ORANGE pump on light) | |
No flow LED (RED failure light) | |
1.5 metre lead and 3 pin Australian/New Zealand plug | |
0.6 metre pump power lead, plug and play | |
Inbuilt 10 bar pressure gauge |
Technical Information
Voltage | 220V (-6%) / 240V (+6%) |
Maximum Current | 16(8) Amps |
Maximum kW | 1.5kW |
Frequency | 50Hz |
Ingress Protection | IP65 |
Maximum Water Temperature | 60 deg C. |
Starting Pressure | 2.2 bar |
Recommended Minimum Pump Pressure Required | 4.0 bar |
Maximum Working Pressure | 10 bar |
Minimum Flow | 1.0 l/m |
To contact White International about White International Pressure Pump Controllers | WHI-SK20PPHS2 use Get a quote.
The controller monitors both the pressure and the flow. It controls the operation of the pump automatically. Because of its design, there is no need for a separate pressure (expansion) tank, nor is there any need to adjust start and stop pressures as per traditional pressure switches.
The unit will protect the pump should the water supply fail (due to blockage in the pipe or tank running dry) and will automatically restart normal operation once water is restored.
Features and Benefits
Construction Characteristic
Inlet | 1" BSP male |
Outlet | 1" BSP male |
Built in non-return valve | |
No flow/loss of prime protection | |
Manual start switch (RESET) | |
Voltage LED (GREEN power on light) | |
Pump working LED (ORANGE pump on light) | |
No flow LED (RED failure light) | |
1.5 metre lead and 3 pin Australian/New Zealand plug | |
0.6 metre pump power lead, plug and play | |
Inbuilt 10 bar pressure gauge |
Technical Information
Voltage | 220V (-6%) / 240V (+6%) |
Maximum Current | 16(8) Amps |
Maximum kW | 1.5kW |
Frequency | 50Hz |
Ingress Protection | IP65 |
Maximum Water Temperature | 60 deg C. |
Starting Pressure | 2.2 bar |
Recommended Minimum Pump Pressure Required | 4.0 bar |
Maximum Working Pressure | 10 bar |
Minimum Flow | 1.0 l/m |
To contact White International about White International Pressure Pump Controllers | WHI-SK20PPHS2 use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product