Wren Hydraulic Wrench Pumps - 10,000PSI ...
These popular high torque wrench pumps are well proven in the Mining, Petrochemical, Power and Rail industries.
240 Volt High Torque Wrench Pumps -10,000 PSI High Torque Pump |
|||||||||||
Pump Model | KLW-4000 | Remote | 6m | ||||||||
Flow Rate | 8.4 Lit / Min | Regulator | 1,200 - 10,000 | ||||||||
Power | 220 - 240 Volt - 50 Hz | DBA | 70 dba at 10,000 psi | ||||||||
Shift Valve | Advance Auto Return | Hydraulic Oil | Viscosity 46 | ||||||||
Sump | 8Lt | Weight | 29 kg without oil | ||||||||
Ports | 4 Ports standard (up to 8 Port available) |
Roll Cage |
Supplied Standard shown |
||||||||
Cooling | Heat Exchanger | ||||||||||
Pump Max Hydraulic Pressure |
700 Bar / 10.000 psi - Regulated internally @ 10,000 psi Max |
Shift Valve | Advance 1,000 - 10,000 psi / Retract Auto 1,200 psi set - activated Via Remote |
The Electric 240 Volt KLW-4000 High Torque Wrench pumps are fast, Light, Compact, Reliable, and supplied fully equipped ready to go. They're designed specifically for double acting Torque Wrenches. The KLW-4000 pumps will run tools from 200 to 50,000 Ft Lbs. The 240 Volt wrench pumps offer the perfect solution if air is not available. Over heating is solved with heat exchangers and are ideal for long haul production jobs .
The regulator / advance pressure Setting is fast. No more winding the regulator up and down. The pressure can be set accurately within 2 rotations from 1000 - 10,000 psi - ready to go.
The KLW-4000 is quiet, faster and more responsive than older pumps. The 3 stage Hydraulic Pump means when the wrench is unloaded during retract or pre-torque, the flow increases speeding up the low pressure cycle. This is most evident on larger high torque IBT 5, 8, and above with larger piston sizes.
The Remote is 4 metres long, 2 button. Top button starts and stops the pump. The second button advances the wrench when pressed. When released it auto retracts the wrench.
These pumps offer the perfect balance of speed power and size. Their smaller size make them easier to carry onto platforms or into cavities. Shipping containers are also available - fits pump + tool.
Pneumatic (Air) Driven Wrench Pumps -10,000 PSI High Torque Pump |
|||||||||||
Pump Model | KLW-4000N | Hydraulic Oil | Viscosity 46 | ||||||||
Flow Rate | 7 Lit / Min | Roll Cage | Supplied as shown ( Heavy Duty - Optional ) |
||||||||
Air Flow Requirement | 4-6 Bar / 60 - 100 PSI @ 25 - 35 CFM | Air Lubro / Water Trap | Supplied standard 3/8 nsp inlet | ||||||||
DBA | 70 dba at 10,000 psi | Remote | 6m | ||||||||
Shift Valve | Advance Auto Return | Weight | 21 kg + oil | ||||||||
Sump | 9 Lit | Regulator | 1,500 10,000 | ||||||||
Ports | 2 Ports standard (4 port if required) |
Max Hydraulic Pressure | 700 Bar / 10.000 psi - Regulated internally @ 10,000 psi Max | ||||||||
Cooler | Internal -Imput Air circulated through sump via heat exchanger | Pump Shift Valve |
Via Remote - Advance 1000 - 10,000 psi / Retract Auto 1,200 psi set |
The KLW-4000N Air Driven High Torque Wrench pumps are fast, Light, Compact, Reliable, and supplied fully equipped ready to go. They're designed to operate using lower air flow and pressure The KLW-4000N pumps will run tools from 200 to 50,000 Ft Lbs. The air driven pumps are the perfect solution if electricity is not available or not safe to use. Over heating is solved by the incoming air and are ideal for long haul production jobs.
Setting The Regulator / advance Pressure is fast. No more winding the regulator up and down. The pressure can be set accurately within 2 rotations from 1000 - 10,000 psi and your ready to go.
The KLW-4000N is quiet, faster and more responsive than older pumps. The 3 stage Hydraulic Pump means when the wrench is unloaded (during retract or pre torque) the flow increases speeding up the low pressure cycle. This is particularly evident on high torque IBT-10 and above with larger piston sizes.
The Remote is 4 metres long, 2 button. Top button starts and stops the pump. The second button advances the wrench when pressed. When released it auto retracts the Hydraulic Torque Wrench.
These pumps offer the perfect balance of speed power and size. Their smaller size make them easier to carry onto platforms or into cavities. Shipping containers will fit Pump + tool are available.
High Torque Pump - Hose Sets |
||
All High Torque hoses are rated at Minimum 4:1 ( 10,000 psi working 40,000psi burst ) This should be a standard requirement for any double acting pump system. Hoses are supplied with standard 1/4" screw couplers and fittings. Hoses are assembled, bleed, tested and Hydraulic test tagged. All hoses are marked " High Torque" hose to avoid confusion and part numbered. |
Description | High Torque Hose set |
Type | 1/4" Twin Line - Steel Braid | |
Rated | 4:1 10,000 Working Pressure | |
Couplers |
1/4" Screw Ball connect |
|
Hose Guards | Supplied | |
Hydraulic Test Tag | Supplied | |
Lengths | 1m, 2m, 3m, 4m, 5m, 7m, 10m, 15m | |
Colour | Yellow | |
Weight | 4.7 kg - 5m Hose |
Shipping Containers for both 240Volt or Pneumatic (Air) Hydraulic Pumps
Protect your Hydraulic Pump Investment
Pumps fit within both our Shipping Containers along with the Hose, Torque Wrench, Torque Chart and sockets.
Reliable, Fast, & proven in the field, offering maximum versatility. 240 Volt or Pneumatic Hydraulic Pumps Power Packs come with Pressure Gauge, Regulator, Couplers & Oil, 3m Remote Control. Ready to go.
2 port & 4 port -These Torque Wrench Pumps are specifically set up to run Hex Cassette Hydraulic Spanner and Hydraulic Square Drive Torque Wrenches. The Electric 240 Volt Driven High Torque Wrench pumps are fast, Light, Compact, Reliable, and supplied fully equipped ready to go.
To contact Hire Torque Tools Victoria about Wren Hydraulic Wrench Pumps - 10,000PSI For High Torque Wrench use Get a quote.
These popular high torque wrench pumps are well proven in the Mining, Petrochemical, Power and Rail industries.
240 Volt High Torque Wrench Pumps -10,000 PSI High Torque Pump |
|||||||||||
Pump Model | KLW-4000 | Remote | 6m | ||||||||
Flow Rate | 8.4 Lit / Min | Regulator | 1,200 - 10,000 | ||||||||
Power | 220 - 240 Volt - 50 Hz | DBA | 70 dba at 10,000 psi | ||||||||
Shift Valve | Advance Auto Return | Hydraulic Oil | Viscosity 46 | ||||||||
Sump | 8Lt | Weight | 29 kg without oil | ||||||||
Ports | 4 Ports standard (up to 8 Port available) |
Roll Cage |
Supplied Standard shown |
||||||||
Cooling | Heat Exchanger | ||||||||||
Pump Max Hydraulic Pressure |
700 Bar / 10.000 psi - Regulated internally @ 10,000 psi Max |
Shift Valve | Advance 1,000 - 10,000 psi / Retract Auto 1,200 psi set - activated Via Remote |
The Electric 240 Volt KLW-4000 High Torque Wrench pumps are fast, Light, Compact, Reliable, and supplied fully equipped ready to go. They're designed specifically for double acting Torque Wrenches. The KLW-4000 pumps will run tools from 200 to 50,000 Ft Lbs. The 240 Volt wrench pumps offer the perfect solution if air is not available. Over heating is solved with heat exchangers and are ideal for long haul production jobs .
The regulator / advance pressure Setting is fast. No more winding the regulator up and down. The pressure can be set accurately within 2 rotations from 1000 - 10,000 psi - ready to go.
The KLW-4000 is quiet, faster and more responsive than older pumps. The 3 stage Hydraulic Pump means when the wrench is unloaded during retract or pre-torque, the flow increases speeding up the low pressure cycle. This is most evident on larger high torque IBT 5, 8, and above with larger piston sizes.
The Remote is 4 metres long, 2 button. Top button starts and stops the pump. The second button advances the wrench when pressed. When released it auto retracts the wrench.
These pumps offer the perfect balance of speed power and size. Their smaller size make them easier to carry onto platforms or into cavities. Shipping containers are also available - fits pump + tool.
Pneumatic (Air) Driven Wrench Pumps -10,000 PSI High Torque Pump |
|||||||||||
Pump Model | KLW-4000N | Hydraulic Oil | Viscosity 46 | ||||||||
Flow Rate | 7 Lit / Min | Roll Cage | Supplied as shown ( Heavy Duty - Optional ) |
||||||||
Air Flow Requirement | 4-6 Bar / 60 - 100 PSI @ 25 - 35 CFM | Air Lubro / Water Trap | Supplied standard 3/8 nsp inlet | ||||||||
DBA | 70 dba at 10,000 psi | Remote | 6m | ||||||||
Shift Valve | Advance Auto Return | Weight | 21 kg + oil | ||||||||
Sump | 9 Lit | Regulator | 1,500 10,000 | ||||||||
Ports | 2 Ports standard (4 port if required) |
Max Hydraulic Pressure | 700 Bar / 10.000 psi - Regulated internally @ 10,000 psi Max | ||||||||
Cooler | Internal -Imput Air circulated through sump via heat exchanger | Pump Shift Valve |
Via Remote - Advance 1000 - 10,000 psi / Retract Auto 1,200 psi set |
The KLW-4000N Air Driven High Torque Wrench pumps are fast, Light, Compact, Reliable, and supplied fully equipped ready to go. They're designed to operate using lower air flow and pressure The KLW-4000N pumps will run tools from 200 to 50,000 Ft Lbs. The air driven pumps are the perfect solution if electricity is not available or not safe to use. Over heating is solved by the incoming air and are ideal for long haul production jobs.
Setting The Regulator / advance Pressure is fast. No more winding the regulator up and down. The pressure can be set accurately within 2 rotations from 1000 - 10,000 psi and your ready to go.
The KLW-4000N is quiet, faster and more responsive than older pumps. The 3 stage Hydraulic Pump means when the wrench is unloaded (during retract or pre torque) the flow increases speeding up the low pressure cycle. This is particularly evident on high torque IBT-10 and above with larger piston sizes.
The Remote is 4 metres long, 2 button. Top button starts and stops the pump. The second button advances the wrench when pressed. When released it auto retracts the Hydraulic Torque Wrench.
These pumps offer the perfect balance of speed power and size. Their smaller size make them easier to carry onto platforms or into cavities. Shipping containers will fit Pump + tool are available.
High Torque Pump - Hose Sets |
||
All High Torque hoses are rated at Minimum 4:1 ( 10,000 psi working 40,000psi burst ) This should be a standard requirement for any double acting pump system. Hoses are supplied with standard 1/4" screw couplers and fittings. Hoses are assembled, bleed, tested and Hydraulic test tagged. All hoses are marked " High Torque" hose to avoid confusion and part numbered. |
Description | High Torque Hose set |
Type | 1/4" Twin Line - Steel Braid | |
Rated | 4:1 10,000 Working Pressure | |
Couplers |
1/4" Screw Ball connect |
|
Hose Guards | Supplied | |
Hydraulic Test Tag | Supplied | |
Lengths | 1m, 2m, 3m, 4m, 5m, 7m, 10m, 15m | |
Colour | Yellow | |
Weight | 4.7 kg - 5m Hose |
Shipping Containers for both 240Volt or Pneumatic (Air) Hydraulic Pumps
Protect your Hydraulic Pump Investment
Pumps fit within both our Shipping Containers along with the Hose, Torque Wrench, Torque Chart and sockets.
Reliable, Fast, & proven in the field, offering maximum versatility. 240 Volt or Pneumatic Hydraulic Pumps Power Packs come with Pressure Gauge, Regulator, Couplers & Oil, 3m Remote Control. Ready to go.
2 port & 4 port -These Torque Wrench Pumps are specifically set up to run Hex Cassette Hydraulic Spanner and Hydraulic Square Drive Torque Wrenches. The Electric 240 Volt Driven High Torque Wrench pumps are fast, Light, Compact, Reliable, and supplied fully equipped ready to go.
To contact Hire Torque Tools Victoria about Wren Hydraulic Wrench Pumps - 10,000PSI For High Torque Wrench use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product